Home>DIY RC Drone Accessories>DIY F220 5inch 3-4S RC FPV Racing Drone Built-in OSD Betaflight with BLHeli-S 30A 4in1 ESC 2300KV Brushless Motor 2.1mm FPV Cam
DIY F220  5inch 3-4S RC FPV Racing Drone Built-in OSD Betaflight with BLHeli-S 30A 4in1 ESC 2300KV Brushless Motor 2.1mm FPV Cam

DIY F220 5inch 3-4S RC FPV Racing Drone Built-in OSD Betaflight with BLHeli-S 30A 4in1 ESC 2300KV Brushless Motor 2.1mm FPV Cam Item NO.: F43202-Q-JMT

Write a Review
US$ 84.62
US$ 99.55 Save US$ 14.93 (15% Off)
model
Basic NO Cam Basic FS-i6 Set PNP NO Receiver BNF W Flysky RX BNF W Frsky RX FPV RTF FS-i6 Set
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name DIY F220 5inch 3-4S RC FPV Racing Drone Built-in OSD Betaflight with BLHeli-S 30A 4in1 ESC 2300KV Brushless Motor 2.1mm FPV Cam
Item NO. F43202-Q-JMT
Weight 1 kg = 2.2046 lb = 35.2740 oz
Category DIY RC Drone Accessories
Brand JMT
Creation Time 2022-12-02

DIY F220 220mm Wheelbase 5inch 3-4S RC FPV Racing Drone Built-in OSD Betaflight with BLHeli-S 30A 4in1 ESC 2.1mm HD Lens FPV Micro Camera

Notice: the Basic version no the Camera, VTX, Receiver

Functions and features:

Wheelbase: 220mm

Support battery: 3-4S

Battery life: about 10 minutes

Remote control distance: about 400 meters


Propellers: 5043

Motor: 2205 2300kv

ESC: 30A BL_S

Flight controller: F4 V2

Fax: VT5804 0-600mw

Camera: 1200TVL 2.1mm

Battery: 3S 1500mah 40C

RECEIVER VERSION: FLYSKY/FRSKY/NO RX (OPTIONAL)

Attention:

1. Do not charge the battery when you are not at home, do not charge the battery immediately after flying, do not overdischarge the battery (over-discharge may cause the battery to be invalidated and invalid), the battery is fully charged and cut off in time after it is fully charged, and it cannot be charged for a long time.

2. Without understanding the flight controller and remote control, please do not modify any parameters and wiring without authorization. 

3. Turn on the remote control before giving power to the aircraft, and unplug the power power after the flight, and then turn off the remote control to prevent accidents.

4. The product is loose parts unassembled/welded, if you have any technical and assembly problems, please feel free to contact us, we have a dedicated technical team to reply to related questions. If customers need to assemble, please feel free to contact us, we will give a reasonable quotation for additional logistics freight and technical assembly cost.

5. This product is not a toy and is not suitable for children under 14 years old.

6. If you are a beginner, it is recommended to be assisted by an experienced adult

7. Novices should pay attention to the plane, do not use their hands to hold the plane when turning, or let children take it to prevent scratches 

8. When the aircraft falls from high altitude, falls to the wall or hits other objects during flight, please turn off the starting switch in time, otherwise it may cause damage to the flight controller, motor, etc., check whether the aircraft is damaged, whether the screws are loose, and everything is normal before you can take off again


No related record found