| Product Name |
iFlight SucceX-D Mini F7 TwinG Stack Mini F7 TwinG FC with SucceX 40A BLHeli_32 4-in-1 ESC for DJI Air Unit |
| Item NO. |
F32741 |
| Weight |
0.027 kg = 0.0595 lb = 0.9524 oz |
| Category |
DIY RC Drone Accessories
> ESC
|
| Brand |
iFlight |
| Creation Time |
2019-10-16 |
iFlight SucceX-D Mini F7 TwinG Stack Mini F7 TwinG FC with SucceX 40A BLHeli_32 4-in-1 ESC for DJI Air Unit
NOTE：
1.The stack is not included DJI Air Unit.
2.If you use your own DJI Remote Controller, you MUST update your firmware betaflight_4.1.0_STM32F7X2 configurator betaflight to 10.6.0 to set up and bind your DJI remote controller.
Model 1 setup：Reveiver tap -----> Choose “Spektrum / Graupner / JR (TAER1234)”
Model 2 setup：Reveiver tap -----> Choose “Frsky / Futaba / Hitec (AETR1234)”
DOWNLOADS：
betaflight_4.1.0_STM32F7X2
betaflight 10.6.0 configurator
SucceX-D mini F7 Manual
The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things as simple as possible, we have included a connector specifically for the DJI air unit, so installation should be a breeze. In addition, we add the popular and reliable USB Type-C instead of Micro USB which makes the connection easily.
Features
• Universal USB Type C connector instead of micro USB
• Plug-and-Play. No need to solder tiny wires.)
• Supports BLHeli pass-through for easy ESC upgrade and configuration.
• Designed to support DJI Digital FPV.
SucceX-D F7 TwinG SPECS：
-MCU：216MHz STM32F722
-Gyro：TwinG ICM20689
-Blackbox：32MB
-Betaflight OSD：YES
-BEC：5V 2.5A
-9V 2.5A 18W Design for DJI FPV Air Unit
-Uarts：5
-ESC Telemetry：UART5
-INA Pad：nuart2
-Input voltage：2-6S,MAX 8S
-Firmware：betaflight_4.0.5_STM32F7X2.hex
-CLI dump file：IFLIGHTF7_TWIN_G.config
Size:27*27mm /20*20mm φ3 mounting
Physical
- Mounting hole：20*20mm，φ4mm with Grommets φ3mm
-Size：31*31mm
SucceX Mini 40A ESC SPECS:
- MCU: STM32F051K66
- Current Sensor: Yes
- Input: 2-6S lipo
- Telemetry: Yes
- Installing Hole: 20x20mm, M3
- Target: iFlight-BL32-4IN1
- BLHeliSuite download :http://www.mediafire.com/file/hkln8fcaif5s9l8/BLHeliSuite32_32616a.zip/file
- Constant: 40Amps
- Burst: 45Amps
- Weight:16.7g
- Dimensions: 31*31mm(including the power pads)
- Mounting Holes: 20*20mm,M3
- Supports Dshot1200,Proshot,Oneshot,Multishot
Package included：
-SucceX-D Mini F7 TwinG FC x 1
-SucceX 40A BLHeli_32 4-in-1 ESC x 1
-DJI compatible harness cable x 1
-Stack mounting screws and dumpers and nuts,cable
2022-05-31