Home>DIY RC Drone Accessories>ESC>Hobbywing SeaKing Pro V3 160A Waterproof 2-6S Lipo 4A BEC Speed Controller Brushless ESC for RC Racing Boat

Hobbywing SeaKing Pro V3 160A Waterproof 2-6S Lipo 4A BEC Speed Controller Brushless ESC for RC Racing Boat Item NO.: F18585

Name: Hobbywing SeaKing Pro V3 160A Waterproof 2-6S Lipo 4A BEC Speed Controller Brushless ESC for RC Racing Boat
Brand: Hobbywing
SKU: F18585
Price: 86.02 USD
Availability: InStock

Write a Review

US$ 86.02

US$ 101.20 Save US$ 15.18 (15% Off)

Customized Requirements

Quantity: Stock ( 9999999 )

Estimate Shipping Cost

Add to Cart

Product Name	Hobbywing SeaKing Pro V3 160A Waterproof 2-6S Lipo 4A BEC Speed Controller Brushless ESC for RC Racing Boat
Item NO.	F18585
Weight	0.2992 kg = 0.6596 lb = 10.5540 oz
Category	DIY RC Drone Accessories > ESC
Tag
Brand	Hobbywing
Creation Time	2017-07-25

Hobbywing SeaKing Pro V3 160A Waterproof 2-6S Lipo 4A BEC Speed Controller Brushless ESC for RC Racing Boat

Product Spacifications:

Name : Hobbywing Seaking Pro 160A brushless ESC

Con.Current : 160A

In.Current : 1050A

Battery : 2-6S Lipo / 6-18 cells NiMH

BEC Model : Switch Model

Outtput :6V-7.4V / 4A

Power Lines : Red--12AWG-200mm x 1 / Black --12AWG-200mm x 1

Output Line : Black --12AWG-150mm x 3

Power Plug : No

Output Plug : No

Parameter setting mode :

(1)Not support remote control ,

(2)support LED programming box Scheduling

(3) Support WiFi Express wireless module

Parameter interface : Throttle cable with yellow lines

Firmware upgrade : Support

Size : 108.5x51.5x14.4mm

Weight : 127g

Suitable : Mono2 / ≤120cm Length Boat

Connecting the electronic governor

1. Install a water-cooled pipe silicone (silicone water cooling pipes to bring your own):

Electric heat sink faucets containing tone, an outer diameter of 5.5mm, for connecting silicone water cooling pipes. Water and

Tap connection position required tie tied tight.

2. Connect the motor:

ESC and motor is connected to the line no strict timing requirements, the ESC's three output lines with three-wire motor

Casual butt, if there turn in the opposite, exchange any two motor cable.

3. Connect the receiver:

• Connect throttle cable (red black and white tricolor cable):

The ESC throttle control cable into the throttle channel (ie THROTTLE channel) receiver. ESC throttle

Output voltage control line also 6V / 7.4V to the receiver and servos, so do not give the receiver an additional power supply,

Doing so may damage the ESC.

• Connect overspeed trigger signal line (single yellow line):

The ESC overspeed trigger signal line at a free passage into the receiver (such as CH3 / CH4) can be.

4. Connect the battery:

ESC input line there is polarity, insert the battery, make sure the ESC (+) pole of the battery (+) phase

Even, (-) pole and (-) is connected. If the power reverse, the ESC will be damaged.

No related record found

Write a Review

All Categories

Hobbywing SeaKing Pro V3 160A Waterproof 2-6S Lipo 4A BEC Speed Controller Brushless ESC for RC Racing Boat Item NO.: F18585

You May Also Like