ADT-Link PCI-E 4.0 x4 to x16 PC Graphics Card Extender Conversion Cable for RTX3090 RX6800xt PCI Express 4x 16x Riser Cable

Brand: ADT-Link

Product name: PCI-E 4.0 x4 to x16 graphics extension cable

Wire length: Support custom 3-100cm length, if you need other lengths, please contact us to change the price, thank you!

Adapted graphics card: RTX3090 RX6800xt, supports PCIE4.0 graphics card

Speed bandwidth: PCIe 4.0 x4

Usage restrictions: PCIe4.0 has high requirements on the equipment. As long as the extension cable is connected, the signal will be attenuated. This product does not guarantee PCIE4.0 full speed. The equipment is aging, the signal is poor or the environment is not good, please use at a lower speed.

note:

The length of the wire refers to the length of the wire, excluding PCB and connectors.

Summary of technical issues

What is the quality of the wire? Is there a shield?

There is metal shielding, advanced EMI shielding conductive polymer, new materials for EMI shielding, flat cable design. This technology allows each cable to be completely covered by the electromagnetic interference shielding of conductive polymer to prevent the incidence or emission of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the cable.

Is the wire soft? Can it be bent?

The wire is the fourth-generation PCIe dedicated cable of ADT. The black wire has a thickness of 1.3mm, the silver wire has a thickness of 1.4mm, and the blue wire has a thickness of 0.85mm. The wire can be bent or folded without affecting the use.

Why is the performance poor after connecting the extension cord? Or is it stuck slowly or not working?

When the graphics card extension cable is connected, the performance is insufficient or the function is abnormal. There are three common problems:

1. The extension cable is incorrectly assembled. The graphics card extension cable should be installed in the graphics card slot closest to the CPU. Other slots have poor performance.

2. The golden fingers of the graphics card or the motherboard socket terminals are not in good contact or have oxides, causing the card to slow down, and the golden finger contact points should be clean.

3. The motherboard is aging, the graphics card is aging, and it is not recommended to use the extension cord for the equipment more than 3 years. Please use at a lower speed if the equipment is aging or the signal is poor.