Package includes:
RC controlled switch x 1
Characteristics:
This module is a nice little relay switch controlled by a spare aux channel on your receiver. Ideal for changing lights, sound and any other auxiliary electrical element.
When the PWM duty is greater than 1500us, the switch will turn on; When the PWM duty is less than 1400us, the switch will turn off.
Specifications:
RX cable length: 100mm
Power input/output cable length: 100mm (each)
Switching charging current (DC): 5A or 10A (direct current)
Input voltage (DC):5-28V
normal mode
The module can read a pulse width that can range from 400 to 2600US.
If the pulse width is more than 1800us, the MOSFET switch will close, if it is less than 1200us, the MOSFET switch will open.
Safe protection function
This module has a safe protection function that reduces the possibility of unexpected activation.
Under the following 2 conditions, safe protection mode will be activated:
1. Pulse exceeds 1800us at first trigger, MOSFET switch open. The LED will flash, you need to move the input to the off position, then it will power on normally more;
2. The signal is bad continuously for 500ms, the MOSFET switch open. The LED will flash. When the signal is good, the device will turn off the safe protection mode.
leds
Normal mode: LED will light when input pulse > 1800us; LED will turn off when input pulse <1200us;
Safe protection mode: LED will flash quickly
No related record found