Home>DIY RC Drone Accessories>DIY RC Drone Kit>JMT QWinOut 450mm DIY Quadcopter Frame kit 920KV CW CCW Motors + 9433 Propellers + 30A ESC + APM 2.8 Flight Controller + GPS Compass
JMT QWinOut 450mm DIY Quadcopter Frame kit 920KV CW CCW Motors + 9433 Propellers + 30A ESC + APM 2.8 Flight Controller + GPS Compass

JMT QWinOut 450mm DIY Quadcopter Frame kit 920KV CW CCW Motors + 9433 Propellers + 30A ESC + APM 2.8 Flight Controller + GPS Compass Item NO.: F27562-A/F27562-B/F27562-C/F27562-D/F27562-E/F27562-F/F27562-G/

5.0
(1)
Write a Review
US$ 64.55
US$ 75.94 Save US$ 11.39 (15% Off)
Version
combo A Combo B Combo C Combo D Combo E Combo F Combo G Combo H Combo I Combo J
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name JMT QWinOut 450mm DIY Quadcopter Frame kit 920KV CW CCW Motors + 9433 Propellers + 30A ESC + APM 2.8 Flight Controller + GPS Compass
Item NO. F27562-A/F27562-B/F27562-C/F27562-D/F27562-E/F27562-F/F27562-G/
Weight 1.66 kg = 3.6597 lb = 58.5548 oz
Category DIY RC Drone Accessories > DIY RC Drone Kit
Brand JMT
Creation Time 2019-05-14

JMT QWinOut 450mm DIY Quadcopter Frame kit 920KV CW CCW Motors + 9433 Propellers + 30A ESC + APM 2.8 Flight Controller + GPS Compass


Package includes: (different Combo have different configuration, please choose the combo you want.)
Basic configuration: 
(All things are included in combo A-G.)

1 Pcs 450mm Frame kit;
4 Pcs 30A ESC;
3 pairs 9443 propellers;
1 Pcs APM2.8 flight controller + GPS compass;
2 Pairs CW CCW 920kv motors
1 Pcs battery strap

Combo A: Basic configuration + XT60 male connector with 14AWG silicone wire 
Combo B: Combo A + 1 Pcs 11.1V 2200MAH Battery + 1 Pcs Charger
Combo C: Combo A + Flysky FS-i6 Transmitter (with IA6 receiver)
Combo D: Combo B + Flysky FS-i6 Transmitter (with IA6 receiver)
Combo E: Combo A + 1 Pcs Gimbal + 1 set Landing Gear
Combo F: Basic configuration+ 1 Pcs 11.1V 3300MAH Battery (with T -type male connector)+ 1 Pcs Charger
Combo G: Combo F+ Radiolink AT9S Transmitter

Combo H: Basic configuration Combo I: Combo H + 1 Pcs 11.1V 2200MAH Battery + 1 Pcs Charger
Combo J: Combo I + Flysky FS-i6 Transmitter (with IA6 receiver)

Frame: 
Wheelbase: 450mm
Body board material: glass fiber
Body panel thickness: 2mm
Weight: 307g
Applicable paddle: 9 inch-11 inch
Applicable motor: 1400KV-1000KV
Applicable ESC: 20A-40A

ESC:
Simonk Firmware 30A Electric Speed Controller with 5V 3A BEC
Weight: 25 g
Input voltage:2-4S
Working current:30A
BEC output: 5V 3A

Motor: 
KV: 920KV
Outer diameter: 28.0 mm
Height: 24.0 mm (Without Shaft)

Flight controller: APM2.8
Size: 70*45*13.5
Weight: 28G
Features:
- Arduino Compatible!
- Can be ordered with top entry pins for attaching connectors vertically, or as side entry pins to slide your connectors in to either end horizontally
- Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer
- Onboard 4 MegaByte Dataflash chip for automatic datalogging.
- Optional off-board GPS, uBlox LEA-6H module with Compass.
- One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000.




2019-05-26

F****0

Great quad for carrying a gopro