FEICHAO 12 LED Simulation Light Realistic Flash Smart System Kit for RC 1/10 Car

Copy and share this link on social network or send it to your friends

Copy

FEICHAO 12 LED Simulation Light Realistic Flash Smart System Kit for RC 1/10 Car Item NO.: F39465

US$ 6.56 (7% Off)
US$ 7.05 Save US$ 0.49
Quantity:
Shipping Cost:
Estimate Shipping Cost

Product Name FEICHAO 12 LED Simulation Light Realistic Flash Smart System Kit for RC 1/10 Car
Item NO. F39465
Weight 0.15 kg = 0.3307 lb = 5.2911 oz
Category DIY RC Drone Accessories > Receiver
Brand Feichao
Creation Time 2020-06-20

FEICHAO 12 LED Simulation Light Realistic Flash Smart System Kit for RC 1/10 Car


Feature:
12 LED lights
Simulated lights
Easy to use
Far flash, super bright
Circuit board design improvement, HOSI power saving
Headlights white, blue tail lights, brake lights red, bright yellow
Suitable for 1/10 RC car

Product Specifications:
Name: 12 LED lighting system kit
material: plastic
Number of LED bulbs: 12
Working current: 100mA
Input voltage: 4.8V 6.0V
Light color: white, red, yellow, blue

Connection method:
CH1-Servo
CH2-Speed controller
CH3-Receiver

Applies to: 1/10 RC car
LED cable length: about 300mm
Circuit board size: 53*33*15mm
Weight: 57.2g

Light description:
Headlights: 4 white LED lights
Connect the lighting system to the receiver CH3: the transmitter can independently control a group of lights, when the vehicle accelerates, the other group of lights is on
The receiver is not connected to CH3: when the car accelerates, one set of lights is always on and the other set of lights is on.
Turn signal: 4 yellow LED lights
When the remote control changes direction, the indicator light will flash synchronously.
Rear lights: 2 blue LED lights, 2 red LED lights
The blue light is always on. When the car accelerates or brakes, the blue light will go out, and only when the car brakes, the red light will come on.

Installation method:
CH2 transmitter:
Connect the plugs of the servo and ESC to CH1 and CH2 on the lighting system, and then connect CH1 and CH2 to the receiver.
CH3 transmitter:
Connect the plugs of the servo and ESC to CH1 and CH2 on the lighting system, and then connect CH1, CH2 and CH3 to the receiver.

No related record found