Crazybee F3 Pro Flight Controller Mobula7 5A 1-2S Compatible Flysky/Frsky/DSMX Receiver for 2S Brushless tiny whoop

Crazybee F3 Pro Flight Controller Mobula7 5A 1-2S Compatible Flysky/Frsky/DSMX Receiver for 2S Brushless tiny whoop Item NO: F26255-F26256-F26812

US$ 36.50
Version:
Compatible Flysky Receiver Compatible Frsky Receiver Compatible DSMX Receiver
Remark:
Customized Requirements
Shipping Cost:
Estimate Shipping Cost
Quantity:
  • Crazybee F3 Pro Flight Controller Mobula7 5A 1-2S Compatible Flysky/Frsky/DSMX Receiver for 2S Brushless tiny whoop
Specifications
Product Name Crazybee F3 Pro Flight Controller Mobula7 5A 1-2S Compatible Flysky/Frsky/DSMX Receiver for 2S Brushless tiny whoop
Item NO F26255-F26256-F26812
Weight 0.0200 kg = 0.0441 lb = 0.7055 oz
Category DIY RC Drone Kit / RC Drone Accessories > Flight Control
Brand Happymodel
Creation time 2018-10-10

Detail

Crazybee F3 Pro Flight Controller Mobula7 5A 1-2S Compatible Flysky/Frsky/DSMX Receiver for 2S Brushless tiny whoop

CRAZYBEE F3 PRO FS Compatible flysky receiver

Flight controller

CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS

MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM

Weight:4.2g
Power supply: 1-2S battery input (DC 3.5-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

Built-in SPI Flysky receiver with telemetry(D8/D16 switchable)

Built-in Betaflight OSD(SPI Control)

Built-in Current meter Max 28A

Current meter scale set to 1175

Built-in 5V 1A Buck / Boost with LC filter

Built-in voltage detection
BLHELI_S pass-through Ready

Heading LED Ready

Onboard 4in1 ESC

MCU upgraded to EFM8BB21

Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600

Built-in

Flysky receiver

SPI BUS receiver

Protocol: AFHDS and AFHDS-2A Switchable

Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Failsafe support

 

1-2S Brushless F3 flight controller with internal 4in1 ESCOSD2.4G receiverCurrent sensorBuck / Booster is coming. You only need to add a VTX and Camera . It’s a best choice for 2S Brushless tiny whoop.

 

 

Package include:

1 x CrazybeeF3 PRO  FS flight controller

2 x Power cables

1 set Shock absorbing rubber and screws


CRAZYBEEF3 PRO FR Compatible Frsky Receiver

Flight controller

CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR

MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM

Weight:4.2g
Power supply: 1-2S battery input (DC 3.5-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)

Built-in Betaflight OSD(SPI Control)

Built-in Current meter Max 28A

Current meter scale set to 1175

Built-in 5V 1A Buck / Boost with LC filter

Built-in voltage detection
BLHELI_S pass-through Ready

Heading LED Ready

Onboard 4in1 ESC

MCU upgraded to EFM8BB21

Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600

Built-in

Frsky NON-EU receiver

SPI BUS receiver

Frsky D8/D16 switchable

Compatible Non EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch

Failsafe support

No ground interference ( Transmitter and receiver 1 m from the ground): 300m


The world first 1-2S Brushless F3 flight controller with internal 4in1 ESCOSD2.4G receiverCurrent sensorBuck / Booster is coming. You only need to add a VTX and Camera . It’s a best choice for 2S Brushless tiny whoop.

 

Package include:

1 x CrazybeeF3FR PRO flight controller

2 x Power cables

1 set Shock absorbing rubber and screws



2018-12-02

JD

These work awesome to make your own custom 2s whoop. They'll handle 1103 motors as well, so if you want to make something like that in a beta75x frame you can. I'm using these in a beta65x frame with happymodel 0802-19000kv and 31mm props. It's like a smaller version of the mobula7!
######