Home>Consumer Electronics>ADT-Link USB 3.1 Type C to TypeC Extension Cable Cord up to 10Gbps 90 Degree Angled/Flat USB-C Wire for FPV Aerial Photography
ADT-Link USB 3.1 Type C to TypeC Extension Cable Cord up to 10Gbps 90 Degree Angled/Flat USB-C Wire for FPV Aerial Photography

ADT-Link USB 3.1 Type C to TypeC Extension Cable Cord up to 10Gbps 90 Degree Angled/Flat USB-C Wire for FPV Aerial Photography Item NO.: F39937-B8 F39937-B9

Write a Review
US$ 4.96
length
T1B-T4B 40CM T1B-T4B 50CM
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name ADT-Link USB 3.1 Type C to TypeC Extension Cable Cord up to 10Gbps 90 Degree Angled/Flat USB-C Wire for FPV Aerial Photography
Item NO. F39937-B8 F39937-B9
Weight 0.03 kg = 0.0661 lb = 1.0582 oz
Category Consumer Electronics
Brand ADT-Link
Creation Time 2022-06-20

ADT-Link USB 3.1 Type C to TypeC Extension Cable Cord up to 10Gbps 90 Degree Angled/Flat USB-C Wire for FPV Aerial Photography


 

Brand: ADT-link

Product model: UTT series products

Product name: USB3.1 Type C adapter extension cable

Wire length: 3-300cm (support length customization, if you need other lengths, please contact us to change the price, thank you.)

Adaptation range: USB 3.1 USB-C to USB-C

Speed Bandwidth: USB 3.1 standard, 10G.bps (measured to support 10G.bps within 0.5 meters, and 5G.bps within 1 meter)

Current capacity: 3A (measured to support 3A within 50cm, 1.5A within 1 meter)


Product application: GPS navigator, storage device, imaging device, for ROCK Pi 4 Raspberry Pi MCU development board, built-in USB device to extend the purpose of adapter, convenient for USB power supply and USB signal transmission of SLR handheld pan/tilt, etc.


Purchase restriction: This product is designed to be connected to built-in USB devices. It is not suitable for ordinary external use. It is limited to the product engineer to specify the purchase. Individual buyers should not place an order for purchase. This product has a fragile structure and is not suitable for civilian use. It is not easy to use for general purposes and does not support return or exchange. Please consider carefully before placing an order.


Note: The extension cable C-type female socket can only be connected to the device, pls don't connect it to the host in reverse , and it can't be used for charging. It is forbidden to use two USB cables in series, otherwise the USB function will be invalid. This is a USB definition limitation, not a design problem.


ADT-Link Type-C series Part-Number Description:

T1-Type-C flat mount;T2-Type-C right angle;T4-Type-C female flat mount;T5-Type-C female right angle


Description of wire length:


The length of the wire refers to the part of the visible wire, excluding PCB and connectors.

No related record found