Home>Consumer Electronics>2.4G Remote Control Signal Booster Long Distance Signal Amplifier For Toy
2.4G Remote Control Signal Booster Long Distance Signal Amplifier For Toy

2.4G Remote Control Signal Booster Long Distance Signal Amplifier For Toy Item NO.: F46965

Write a Review
US$ 9.53
US$ 11.21 Save US$ 1.68 (15% Off)
Quantity

Copy and share this link on social network or send it to your friends

Copy
  • 2.4G Remote Control Signal Booster Long Distance Signal Amplifier For Toy
Product Name 2.4G Remote Control Signal Booster Long Distance Signal Amplifier For Toy
Item NO. F46965
Weight 0.07 kg = 0.1543 lb = 2.4692 oz
Category Consumer Electronics
Creation Time 2022-03-24

2.4G Remote Control Signal Booster Long Distance Signal Amplifier For Toy

Product description:
This 2.4G signal booster is used at the end of the transmitter. It is only suitable for transmitters in the 2404-2483MHZ working frequency band. It amplifies the power of the high-frequency signal to meet the transmission power requirements and transmit the signal to a longer distance. effect.

Working voltage: DC2.8-4.2V
Charging voltage: DC4.6V
Working current: 80-120MAH
Working frequency: 2.4GHZ
Transmission frequency: 14DBM
Working temperature: -40—+65 degrees Celsius
Size: 160MM*36mm*18mm
Measured distance: about 500-800 meters (sunny. The actual test distance on a 60-meter-wide urban road)
Communication interface: SMA-JE
Antenna interface: SMA-KE
Antenna type: External SMA inner needle can be bent high gain (3.0dbi) antenna
Charging time: about 1 hour
Fully charged working time: about 1.5 hours (turn off the signal booster switch without controlling the remote control. When you need to control the remote control time, turn on the remote control to increase the battery life. If you need to work uninterrupted, you can also use a mobile power supply or other DC5V power supply Connect the USB charging cable to charge and use at the same time.
Precautions:
1. The signal booster can only be charged with the original USB charging cable. It is strictly forbidden to use other unknown power chargers to charge the signal booster, so as to avoid damage due to voltage mismatch.
2. Before the signal booster is turned on, be sure to connect the transmitter and receiver to the frequency first, and then turn it on, so as not to fail the frequency connection due to the signal being too strong.
3. If the 2.4G remote control equipped with a signal booster has no signal latching function, it is strictly forbidden to turn off the remote control switch or replace the battery in the middle when it is used remotely, otherwise the frequency will be disconnected and the remote control cannot be controlled. The device is returned, so be sure to charge the battery before using it for a long time. Predictable battery life!
4. Please use a charger with an output voltage of DC5V and an output current of less than 2000MAH (2A) to charge the USB charging cable. It is strictly forbidden to use a charger above 2A to connect the USB charging cable to charge. So as not to damage the USB charging cable. 5. During the use of the USB charging cable, Win regularly check whether its wires, plugs, shells and other parts are damaged, and stop using it when they are found damaged. Even repaired perfectly in use.

No related record found