Home>Consumer Electronics>Computer Accessories>Riser Card>XT-XINTE Add on Card USB 3.1 Dual 10Gbps 2x Type-C PCI Express Riser Card Port Expansion Adapter for Mac Pro Miner Windows

XT-XINTE Add on Card USB 3.1 Dual 10Gbps 2x Type-C PCI Express Riser Card Port Expansion Adapter for Mac Pro Miner Windows Item NO.: F33229

US$ 18.30

Quantity: Stock ( 9999999 )

Estimate Shipping Cost

Product Name	XT-XINTE Add on Card USB 3.1 Dual 10Gbps 2x Type-C PCI Express Riser Card Port Expansion Adapter for Mac Pro Miner Windows
Item NO.	F33229
Weight	0.103 kg = 0.2271 lb = 3.6332 oz
Category	Consumer Electronics > Computer Accessories > Riser Card
Brand	XT-XINTE
Creation Time	2019-11-01

XT-XINTE Add on Card USB 3.1 Dual 10Gbps 2x Type-C PCI Express Riser Card Port Expansion Adapter for Mac Pro Miner Windows

Description:
Brand: XT-XINTE
Black colour
Weight: about 88g
Product chip: ASM1142
Expansion interface: USB3.1 Type-C x 2
Applicable interfaces: PCI-E4X, PCI-E8X, PCI-E16X (Note: PCI and 1X slots are not supported)
System requirements: Windows 2000 / XP / Vista / 7/10

Features:
1, using Taiwan imported chip, Xiang Shuo AS1142, stable performance, high compatibility.
2, comes with 4A processing chip power, no external power supply.
3, using over-current and over voltage protection to protect the motherboard from maximum protection
4, all solid state capacitors, not affected by harsh environments.

Supports PCI Express2.0 X 4 Lanes, capable of transferring up to 10Gbps MAX
Supports USB 3.1 Type-C Specification X 2 Port Connector
Backward compatible with USB 1.1 / USB 2.0./USB3.0
Supports you following rate data rate as follows: Low sppeed (1.5 Mbps) /
Full-speed (12 Mbps) / high-speed (480 Mbps) / Super-speed (5 Gbps) / 10Gbs
Low Profile PCI Suppots
No need for External power supply for each USB3.1 port
Up to 900mA MAX / port

Frames and display items include:
1 * Dual USB 3.1 Type-C PCI Express (PCI-E) Card
1 * CD Driver
1 * User manual
2 * screws

Note: shooting light and different displays can cause the color of the item in the picture a little different from the real thing.

The allowed error measure is +/- 1-3 cm.