RadioKing TX18S/Lite Hall Sensor Gimbals 2.4G 16CH Multi-protocol RF System OpenTX Transmitter w/ Happymodel  Moblite7 Mobula6 Mobula7 1S 75mm Ultra Light Brushless Whoop

Copy and share this link on social network or send it to your friends

Copy

RadioKing TX18S/Lite Hall Sensor Gimbals 2.4G 16CH Multi-protocol RF System OpenTX Transmitter w/ Happymodel Moblite7 Mobula6 Mobula7 1S 75mm Ultra Light Brushless Whoop Item NO.: F41424-A B C D E F

Write a Review
US$ 169.16 (10% Off)
US$ 187.96 Save US$ 18.80
Type:
TX18S Left hand
Version:
W/ Moblite7 Frsky W/ Mobula6 Flysky W/ Mobula6 Frsky W/ Mobula7 Flysky W/ Mantis85 Frsky W/ Mantis85 Flysky
Quantity:
Shipping Cost:
Estimate Shipping Cost

Product Name RadioKing TX18S/Lite Hall Sensor Gimbals 2.4G 16CH Multi-protocol RF System OpenTX Transmitter w/ Happymodel Moblite7 Mobula6 Mobula7 1S 75mm Ultra Light Brushless Whoop
Item NO. F41424-A B C D E F
Weight 1.56 kg = 3.4392 lb = 55.0274 oz
Category DIY RC Drone Accessories > Remote Control
Brand RadioMaster
Creation Time 2021-01-27

RadioKing TX18S/Lite Hall Sensor Gimbals 2.4G 16CH Multi-protocol RF System OpenTX Transmitter w/ Happymodel  Moblite7 Mobula6 Mobula7 1S 75mm Ultra Light Brushless Whoop





Happymodel Moblite7 1S 75mm ultra light brushless whoop EX0802 brushless motors VTX power switchable 25mw~200mw lightest 1s AIO 5IN1 F4 flight controller







Happymodel Mobula6 HD 1S 65mm Brushless Quadcopter Whoop FPV Racing Drone BNF with AIO 4IN1 Crazybee F4 Lite Runcam Split3-lite 1080P HD Camera


Features:
AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
Extreme light 1S 65mm Brushless HD whoop only 27g
Come with Runcam Split3-lite 1080P HD DVR  
Smooth and agile
Compatible for 1S Lipo/LIHV
Camera Angle adjustable
Specifications:
Brand Name: Happymodel
Item Name: Mobula6 HD 1S 65mm Brushless whoop HD drone BNF version
Wheelbase: 65mm
Size: 80mm*80mm*40mm
Weight: 27g
Receiver option:
Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)
Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)
External DSM2/DSMX version(Compatible with Spektrum DSM2/X transmitters)
External TBS CRSF NANO version(Compatible with TBS ransmitters)

Package includes:
Mobula6 1S 65mm whoop Drone Frame*    1
SPI Receiver Option1: Crazybee F4 Lite FC built-in Frsky SPI D8 RX    *1
SPI Receiver Option2: Crazybee F4 Lite FC built-in Flysky SPI RX    
External receiver option1:DSM2/DSMX compatible satellite receiver     
External receiver option2:TBS CRSF NANO receiver     
EX0802 KV19000 brushless motor     *4
Gemfan 1219-3 Propellers(4cw+4ccw)    *1
Runcam Split3-lite 1080P HD Camera +DVR    *1
5.8G 25mw 40ch vtx (Flight controller built-in)     *1
1S 250mah 30C LiHV Battery    *4
1S Lipo/LIHV USB Charger    *1
Propeller disassemble tool    *1

 

Spare parts specifications:

Motor

Mode: EX0802 19000KV
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.7g
No.of Cells(Lipo):1S only

Propellers

Gemfan 1219-3

Center Thickness:5mm

Prop Disk Diameter:31mm

Center Hole Inner diameter:1.0mm

Weight:0.28g

Flight controller

(Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR

(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS

(External DSM2/DSMX RX version) CRAZYBEE F4 Lite Firmware target:CrazybeeF4DX

(External TBS CRSF NANO RX version) CRAZYBEE F4 Lite Firmware target:CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
Built-in voltage detection

Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV

Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version

SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model

Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

Onboard Flysky SPI receiver Version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support

External DSMX version

Resolution: 1024/2048
Operating voltage: 3.3V
Working current: 60MA
Size: 15mm*10mm*5mm
Antenna length: 30mm
Protocol: DSM2/DSMX

External TBS CRSF Nano receiver version

Original TBS CROSSFIRE Receiver  ,CRSF Protocol , Official TBS transmitter compatible

Onboard 5.8g VTX

Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band 

Smartaudio ready

FPV Camera

ModelRunCam Split3-Lite

Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)

Video Resolution:[email protected]/[email protected]/[email protected]/[email protected]

Video File FormatMOV

Image Resolution:2 MP

TV ModeNTSC (720*480)/PAL (720*576) Switchable

InterfaceJST 1.25mm / UART and SH 1.0mm

Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)

Hole Distance of Installation25.5*25.5mm

PCB Size29*29mm

Lens Module Size14*14mm

Lens SpecsM9

Power InputDC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.)

Working Current450mA @5V

Lipo Battery

Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 55mmx12mmx7mm
Weight: 6.5g

Connector: PH2.0

Happymodel Mobula7 HD 2-3S 75mm Crazybee F4 Pro Whoop FPV Racing Drone PNP BNF w/ CADDX Turtle V2 HD FPV Mini Camera

Notes:

DSMX Version has been avaliable now


Specifications:

Brand Name: Happymodel

Item Name: Mobula7 HD 2-3S 75mm Brushless whoop drone

Wheelbase: 75mm

Size: 98mm*98mm*45mm

Weight: 48g(without battery)

Weight:72g(with Original 3s 300mah Lipo battery )

 

Features:

New Crazybee F4 PRO V2.0 AIO Flight controller 1-3s Lipo Compatible

2S for indoor Cine whoop mode

3S for outdoor Freestyle whoop mode

Betaflight support , multi flight mode: ACRO/AIR/ANGLE

The lightest 1102 brushless motor only 2.7g with double ball bearings

Powerful and smoothly 

Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)

Caddx turtle v2 + 1080p 60fps DVR ready

Camera Angle adjustable

VTX power switchable 25mw~200mw

Smartaudio ready , change VTX bands, powers, channels via OSD

Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible

Flysky version support both AFHDS and AFHDS-2A protocol transmitter

DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter

No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..

Full telemetry function ready (Frsky Non-EU and Flysky version support)

Special Breath light ready

Real Bind and Fly version

Compatible both for 2s-3s Lipo/LIHV

 


Package includes:

1xMobula7 V3 Frame
1xCrazybee F4 V2.0 PRO FC
4xEX1102 KV10000 Motor
1x40mm propeller(4cw+4ccw)
1xCaddx Turtle v2+1080p 60fps DVR
1x5.8G 40ch 25mw-200mw VTX
1x3S 11.4v 300mah 30C/60C battery
1xPropeller disassemble tool
1xScrewdriver


Spare parts specifications:

Motor

Mode: EX1102 KV10000

Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):1S-3S

Flight controller

(Frsky version) CRAZYBEE F4FR PRO V2.0 Firmware target: CrazybeeF4FR

(Flysky version) CRAZYBEE F4FS PRO V2.0 Firmware target: CrazybeeF4FS

(DSM2/DSMX version) CRAZYBEE F4DX PRO V2.0 Firmware target: CrazybeeF4DX

(No RX version) CRAZYBEE F4 PRO V2.0 Firmware target: CrazybeeF4DX

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM
Power supply: 1-3S battery input (DC 3.5-13V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)

Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)

DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver

No RX version need to add external Receiver

Built-in Betaflight OSD(SPI Control)

Built-in Current meter Max 28A

Current meter scale set to 1175

Built-in 5V 1Buck / Boost with LC filter

Built-in voltage detection

Onboard 4in1 ESC

MCU upgraded to EFM8BB21

Power supply: 1-3S LiPo/LiPo HV (3.5v/13v)
Current: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600

Frsky NON-EU receiver Version

SPI BUS receiver

Frsky D8/D16 switchable

Compatible Non EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch

Failsafe support

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Flysky receiver Version

SPI BUS receiver

Protocol: AFHDS and AFHDS-2A Switchable

Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Failsafe support

DSM2/DSMX receiver version

Serial bus receiver

Protocol: DSM2/DSMX compatible

Channels:6-9 (Depend on your radio)

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

PNP No RX version

No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc.

VTX

Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband

Smartaudio ready
Weight: 3g

CADDX Turtle V2

Image sensor: 1/2.7" CMOS sensor

Horizontal: 800TVL

TV system: NTSC/PAL changeable

Video Resolution: [email protected] / [email protected] / [email protected]

Power Input: DC 4.5-20V

FPV FOV: 155°

Recording FOV: 170°

Mini Illumination: 0.01lux

Image Resolution: 2 Megapixels

Lens: 1.8mm Turbo Eye Lens

Working Current: [email protected]/[email protected] (low consumption)

OSD Menu: Yes (Support Voltage Display)

Video Files: MP4

Audio: Support

Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100

S/N Ratio: >60dB (AGC OFF)

Video Output: CVBS

Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)

Color: Red

 

Lipo Battery

Capacity:300mAh
Voltage:11.4v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 65mmx18mmx11mm
Weight: 23g

Connector: XT30





Mantis 85 Micro FPV RACING DRONE BNF with Frsky D8 / Flysky 8ch / Specktrum DSM2 Receiver/ Radiolink R6DSM Receiver

Specifications:
Item Name:Mantis 85 Micro FPV RACING DRONES BNF
Size:100mm*100mm*25mm
Weight: 52g( battery not include)
Flight controller: Super_S F4 Flight controller built-in Betaflight OSD
Motor: Happymodel SE1102 KV9000 brushless motor
Propeller: 1935 3-blades propeller
Camera: 600TVL HD CMOS 1/4inch 
VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter
Battery: 7.4V 400mah 30C lipo battery
OSD: Betaflight OSD
Firmware of Flight controller :Betaflight 3.2.0
Flight time : 4minutes 
Buzzer Ready


BNF version Receiver Option:
-Frsky D8 modee SBUS receiver (RSSI ready)
-Flysky 8ch AFHDS 2A receiver 
-Specktrum DSM2/DSMX Compatible receiver

- Radiolink R6DSM Receiver


Flight controller Specification:
-Size:20mm*20mm*5mm
-Mount hole: 16mm*16mm
-Processor: STM32F405RGT6 MCU
-Sensor: SPI Sensor MPU6000
-Built-in Betaflight OSD ( Batt voltage, RSSI , Artificial Horizon , Fly mode , -Flytime, Craft name etz.)
-Firmware version: Betaflight 3.2.0 Dshot 
-Target: OmnibusF4SD




No related record found

You May Also Like