Home>DIY RC Drone Accessories>DIY RC Drone Kit>RCinpower GHF411AIO F4 Flight Controller AIO Betaflight OSD 2-4S BLHELI_S 20A ESC Brushless FC with 1204 5000KV 3-4S Brushless Motor with 3018 Propellers
RCinpower GHF411AIO F4 Flight Controller AIO Betaflight OSD 2-4S BLHELI_S 20A ESC Brushless FC with 1204 5000KV 3-4S Brushless Motor with 3018 Propellers

RCinpower GHF411AIO F4 Flight Controller AIO Betaflight OSD 2-4S BLHELI_S 20A ESC Brushless FC with 1204 5000KV 3-4S Brushless Motor with 3018 Propellers Item NO.: F36585-A

Write a Review
US$ 57.13
US$ 67.21 Save US$ 10.08 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name RCinpower GHF411AIO F4 Flight Controller AIO Betaflight OSD 2-4S BLHELI_S 20A ESC Brushless FC with 1204 5000KV 3-4S Brushless Motor with 3018 Propellers
Item NO. F36585-A
Weight 0.39 kg = 0.8598 lb = 13.7568 oz
Category DIY RC Drone Accessories > DIY RC Drone Kit
Brand JMT
Creation Time 2020-04-28

RCinpower GHF411AIO F4 Flight Controller AIO Betaflight OSD 2-4S BLHELI_S 20A ESC Brushless FC with 1204 5000KV 3-4S Brushless Motor with 3018 Propellers


GHF411AIO F4 Flight Controller AIO Betaflight OSD 2-4S BLHELI_S 20A  ESC Brushless for 3-5'' Mini RC Drone Quadcopter Models

Description:
The new generation toothpick drone, new AIO brushless flight controller can handle 20A continuous current. The board has strong performance while still maintaining an ultra-light weight of only 6.3g. Break through the limits of the function of toothpicks and explore more possibilities of 3''-5'' drones. This board is your choice to customize the toothpick drone to suit your needs.

Features:
Can handle 20A A4 continuous current
With 4 motor pluggable pins, not pre-welded by default, best suited for your self-assembly needs
Compatible with 120X, 130X and 140X motors
The USB port is mounted on the side, you have more installation possibilities while still accessing the USB port
All welded ports are on the edge of the flight controller, which makes it easy to solder
Double-sided motor pads. Pin pads and wire pads are built-in for motor connection
Integrated Betaflight MATEKF411 processor flight control, Betaflight OSD, F4 MCU and 20A ESC, support 2-4S battery
Specification:

Flight control parameters
• CPU: STM32F411CEU6 (100MHZ)
• Six axes: MPU6000 (SPI connection)
• Size: 32.5 * 32.5mm (25.5mm mounting hole)
• Firmware version: Betaflight MATEKF411 (MK41)
• OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
• Receiver: Support Frsky XM / XM + receiver / Futaba receiver / Flysky receiver / TBS Crossfire receiver / DSMX receiver
• Supports WS2812 and other programmable LEDs
• Built-in current sensor
• Weight: 6.3g

ESC parameters
• Support BLheli / BLHELI_S
• Supports PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
• Input voltage: 2S-4S Lipo
• Continuous current: 20A
• Firmware: BLHELI_S
• Motor connector: 1.25mm pin header

1204 5000KV 3-4S Brushless Motor with Gemfan Hurricane 3018 Propellers for FPV Racing Drone Quadcopter

Brand: RCinpower
Model: 1204
KV value: 5000KV
Color: pink + blue
Net weight: 6g
Wire: 0.8mm silicone wire
Line length: 8cm
For 2-3 inch paddles 3-4S Lipo

3018 3x1.8 3 Inch 2-Blade PC Propeller 1.5mm Hole T Mount for Toothpick RC Drone Multirotor 1108-1303 Motor
Model: Hurricane 3018
Item Name: 3018 3x1.8 3 Inch 2-Blade Propeller
Quantity: 4 CW & 4 CCW
Color: Transparent Grey
Weight: 0.75g

Features:
- 2mm press fit and T mount
- Will fit 1.5mm shafts with T mount
- Polycarbonate
- Very low load

Package included:
1x Toothpick GHF411AIO 2-4S brushless flight controller
4x 1204 5000KV 3-4S Brushless Motor
4x Pairs of 3018 Propellers 


No related record found