Home>DIY RC Drone Accessories>Multi-purpose Power Management Module For DJI FPV Glasses Fat Shark FPV Multi-voltage Output Settings

Multi-purpose Power Management Module For DJI FPV Glasses Fat Shark FPV Multi-voltage Output Settings Item NO.: F46625-D1 F46625-D2

Name: Multi-purpose Power Management Module For DJI FPV Glasses Fat Shark FPV Multi-voltage Output Settings
SKU: F46625-D1 F46625-D2
Price: 6.79 USD
Availability: InStock

Write a Review Sold (3)

US$ 6.79

US$ 7.99 Save US$ 1.20 (15% Off)

Color

Quantity: Stock ( 19999995 )

Estimate Shipping Cost

Add to Cart

Product Name	Multi-purpose Power Management Module For DJI FPV Glasses Fat Shark FPV Multi-voltage Output Settings
Item NO.	F46625-D1 F46625-D2
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	DIY RC Drone Accessories
Creation Time	2022-02-26

This product is a power bank power management module that conforms to USB Power Delivery PD protocol and QC protocol with LED display voltage.
1. Support output voltage 5V, 9V, 12V, 15V, 20V (the specific range is limited by the mobile power supply at the input end).
2. With key lock function, press and hold the button to set the output voltage 5-9-12-15-20V cycle before the module is powered on (to prevent misoperation during work, resulting in output voltage changes and burning load equipment).
3. With the trigger voltage saving function, the last voltage setting will be executed after re-powering. Press the button during normal operation to view the set voltage.
4. The three-digit digital tube will display the set voltage (when the button is pressed) or the current output actual voltage value (before supplying power to the load device, please check whether the voltage value displayed by the digital tube is suitable for the load device).
5. Maximum 20V 5A output (the actual value is limited by the input, only 60W output is supported without E-mark. Higher power requires the line to support E-mark).
6. Can be connected: mobile power supply (support PD, QC protocol) and mains charging head (support PD, QC protocol) or car charging head (support PD, QC protocol) for DJI FPV glasses, fat shark glasses, SKY glasses, outdoor Electric soldering iron, outdoor LED lighting, cameras, small appliances, electronic cigarettes, outdoor power tools, walkie-talkie chargers, etc.
7. This power management module only sends the protocol to the input mobile power supply, and the actual output voltage and current are limited by the input power supply and load equipment.

8. The input interface is USB Type-C, and the output interface is XT60PW (you can expand the output interface yourself).
9. If your device is DJI FPV Glasses V2, please choose the cabled version (XT60 to DC cable), DJI FPV Glasses V1, Fat Shark FPV Glasses, etc. come standard with this XT60 to DC cable.
Module size: 501712mm
Weight: 8.5g
XT60 to DC (5.52.1) cable length 1.3 meters 38g