JMT T85 85mm FPV Racing Drone Quadcopter BNF Carbon Fiber Frame Kit Crazybee F4 Pro V2.0 1-3S FC EX1102 9000KV Motor Turbo Eos2 FPV Camera VTX

JMT T85 85mm FPV Racing Drone Quadcopter BNF Carbon Fiber Frame Kit Crazybee F4 Pro V2.0 1-3S FC EX1102 9000KV Motor Turbo Eos2 FPV Camera VTX Item NO: F28907/F28928/F28929-A/B/C/D/E/F/G/H/I/J/K/L

US$ 85.13 (10% Off)
US$ 94.59 Save US$ 9.46
Canopy Color:
Red Yellow Purple
FC Version:
Flysky DSMX Frsky
Version:
Basic Version No Remote control Basic Version With Remote Control Standard Version No Remote Control Standard Version With Remote Control Upgrade Version No Remote Control Upgrade Version with Remote Control
Quantity:
Shipping Cost:
Estimate Shipping Cost
  • JMT T85 85mm FPV Racing Drone Quadcopter BNF Carbon Fiber Frame Kit Crazybee F4 Pro V2.0 1-3S FC EX1102 9000KV Motor Turbo Eos2 FPV Camera VTX
  • https://www.youtube.com/watch?v=NNegEzWOLyA&feature=youtu.be
Product Name JMT T85 85mm FPV Racing Drone Quadcopter BNF Carbon Fiber Frame Kit Crazybee F4 Pro V2.0 1-3S FC EX1102 9000KV Motor Turbo Eos2 FPV Camera VTX
Item NO F28907/F28928/F28929-A/B/C/D/E/F/G/H/I/J/K/L
Weight 0.3250 kg = 0.7165 lb = 11.4640 oz
Category DIY RC Drone Kit / RC Drone Accessories > DIY RC Drone Kit
Brand JMT
Creation time 2019-05-24

JMT T85 85mm FPV Racing Drone Quadcopter BNF Carbon Fiber Frame Kit Crazybee F4 Pro V2.0 1-3S FC EX1102 9000KV Motor Turbo Eos2 FPV Camera VTX

https://www.youtube.com/watch?v=NNegEzWOLyA&feature=youtu.be

Product Description: T85 85mm frame is made of high-strength carbon fiber, which is resistant to falling and crashing. The size of the frame is small. It is suitable for indoor and outdoor use. It is equipped with a dedicated battery holder that can both function as a tripod and protect the battery. 3D Print the propeller cover to prevent damage to the propeller and motor during a collision

Brand: JMT
Color: red, yellow, purple hood
Wheelbase: 85mm
Weight: 21g
Thickness: 1.5mm
Applicable to flight control: 28.5mm*28.5mm size flight control

Features: carbon fiber body board + 3D printing TPU material battery holder, hood + 3D printing PLA material propeller protection cover

Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-3S battery input (DC 3.5-13V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
ESC MCU Upgraded to EFM8BB21
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS-2A Compatible)
DSMX version Built-in Serial-based DSM2/DSMX compatible satellite receiver(Default RX2 was used for DSM2/DSMX receiver)
No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc.
Built-in Betaflight OSD (SPI Control)
Built-in Current meter sensor Max up to 28A
Current meter scale set to 1175
Built-in 5V 1A Buck / Boost with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Multi Serial port support
Fully compatible with almost Brushless whoop drone
Weight:4.3g
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1-3S LiPo/LiPo HV (3.5v/13v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600
Receiver support No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc.
Motor


Mode: EX1102 

KV options: 9000KV 

Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):2S-3S


Package include:

Basic Version No Remote control

1xJMT T85 Carbon Fiber Frame Kit with 3d print Canopy

1xCrazybee F4 Pro V2.0 1-3S Flight Control

2xEX1102 1.5mm Motor CW

2xEX1102 1.5mm Motor CCW

1X Caddx.us Turbo Eos2 Camera  2.1mm 4:3 NTSC (If you need other version,please inform us in advance)

1x5.8GHz 40ch VTX

1Xbuzzer

1xGEMFAN 1940 props (4 pairs/pack)

1xIMAXRC B3 pro charger

1x JMT 7.4V/2S 450MAH XT30 Battery


Basic Version With Remote Control

1xJMT T85 Carbon Fiber Frame Kit with 3d print Canopy

1xCrazybee F4 Pro V2.0 1-3S Flight Control

2xEX1102 1.5mm Motor CW

2xEX1102 1.5mm Motor CCW

1X Caddx.us Turbo Eos2 Camera  2.1mm 4:3 NTSC (If you need other version,please inform us in advance)

1x5.8GHz 40ch VTX

1Xbuzzer

1xGEMFAN 1940 props (4 pairs/pack)

1xIMAXRC B3 pro charger

1x JMT 7.4V/2S 450MAH XT30 Battery

1xFlysky FS I6 Remote Controller



Standard Version No Remote Control

1xJMT T85 Carbon Fiber Frame Kit with 3d print Canopy

1xCrazybee F4 Pro V2.0 1-3S Flight Control

2xEX1102 1.5mm Motor CW

2xEX1102 1.5mm Motor CCW

1X Caddx.us Turbo Eos2 Camera  2.1mm 4:3 NTSC (If you need other version,please inform us in advance)

1x5.8GHz 40ch VTX

1Xbuzzer

1xGEMFAN 1940 props (4 pairs/pack)

1xIMAXRC B3 pro charger

1x JMT 7.4V/2S 450MAH XT30 Battery

1xArch 

1xApron

1XFPV Watch

Standard Version With Remote Control


1xJMT T85 Carbon Fiber Frame Kit with 3d print Canopy

1xCrazybee F4 Pro V2.0 1-3S Flight Control

2xEX1102 1.5mm Motor CW

2xEX1102 1.5mm Motor CCW

1X Caddx.us Turbo Eos2 Camera  2.1mm 4:3 NTSC (If you need other version,please inform us in advance)

1x5.8GHz 40ch VTX

1Xbuzzer

1xGEMFAN 1940 props (4 pairs/pack)

1xIMAXRC B3 pro charger

1x JMT 7.4V/2S 450MAH XT30 Battery

1xArch 

1xApron

1XFPV Watch

1xFlysky FS I6 Remote Controller



Upgrade Version No Remote Control

1xJMT T85 Carbon Fiber Frame Kit with 3d print Canopy

1xCrazybee F4 Pro V2.0 1-3S Flight Control

2xEX1102 1.5mm Motor CW

2xEX1102 1.5mm Motor CCW

1X Caddx.us Turbo Eos2 Camera  2.1mm 4:3 NTSC (If you need other version,please inform us in advance)

1x5.8GHz 40ch VTX

1Xbuzzer

1xGEMFAN 1940 props (4 pairs/pack)

1xIMAXRC B3 pro charger

1x JMT 7.4V/2S 450MAH XT30 Battery

1xArch 

1xApron

1x5.8G FPV Goggles



Upgrade Version with Remote Control

1xJMT T85 Carbon Fiber Frame Kit with 3d print Canopy

1xCrazybee F4 Pro V2.0 1-3S Flight Control

2xEX1102 1.5mm Motor CW

2xEX1102 1.5mm Motor CCW

1X Caddx.us Turbo Eos2 Camera  2.1mm 4:3 NTSC (If you need other version,please inform us in advance)

1x5.8GHz 40ch VTX

1Xbuzzer

1xGEMFAN 1940 props (4 pairs/pack)

1xIMAXRC B3 pro charger

1x JMT 7.4V/2S 450MAH XT30 Battery

1xArch 

1xApron

1x5.8G FPV Goggles

1xFlysky FS I6 Remote Controller




No related record found

You May Also Like