Home>DIY RC Drone Accessories>Flight Control>Holybro - fttec FC G4 KISS V2 flight controller, 6-27V, 5V/16V, BEC, 170Mhz, DSHOT2400 mathematical accelerator for FPV RC Drones
Holybro - fttec FC G4 KISS V2 flight controller, 6-27V, 5V/16V, BEC, 170Mhz, DSHOT2400 mathematical accelerator for FPV RC Drones

Holybro - fttec FC G4 KISS V2 flight controller, 6-27V, 5V/16V, BEC, 170Mhz, DSHOT2400 mathematical accelerator for FPV RC Drones Item NO.: F48654

Write a Review
US$ 74.67
US$ 87.85 Save US$ 13.18 (15% Off)
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name Holybro - fttec FC G4 KISS V2 flight controller, 6-27V, 5V/16V, BEC, 170Mhz, DSHOT2400 mathematical accelerator for FPV RC Drones
Item NO. F48654
Weight 0.04 kg = 0.0882 lb = 1.4110 oz
Category DIY RC Drone Accessories > Flight Control
Brand Holybro
Creation Time 2022-11-02

  • Product Details

Updated:
New Rev1.7
Recommending method: https://gui.fettec.net/FC/index.html


Description:

The Holybro FETtec FC G4 features the latest STM32 G4 MCU with math accelerator for the ultimate in flight performance, onboard OSD for KISS flight tuning, 2 dedicated BECs for 5V and 16V switchable power, DSHOT2400 outputs for support of up to 8 motors, and dual 20x20 and 30x30 mounting holes.

Specifications:

  • Latest STM32G4 Processor
    • 170Mhz + Math accelerator
    • ICM  Gyro (Updated)
  • Supply voltage 6-27V (2S-6S Lipo)
  • 2x dedicated onboard BEC (max. 1000mA each) (Updated)
    • 5V BEC for RX
    • 5V/16V BEC for VTX (switchable and real Pit*)
  • 2x 8 pin connector for solder free ESC connection
    • Connector 1: ESC signal 1-4, telemetry, VCC, GND
    • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
    • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
  • 2x 6 pin connectors for serials
    • RX1, TX1, 3.3V, VCC, 5V, GND
    • RX3, VCS/TX3, RGB LED, VCC, 5V, GND
  • 1x 4 pin connector for receiver
    • Signal, TLM, 5V, GND
  • 5 UART serials
    • UART 1 free
    • UART 2 used for Receiver
    • UART 3 free
    • UART 4 used for onboard OSD, can be set free
    • UART 5 used for ESCs / TLM / Onewire
  • 4 ESC solder pads (Signal/GND) in each corner
  • Buzzer pads
  • 4 tiny RGB LEDs (selectable color)
  • Supported ESC protocols
    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
  • FETtec KISS firmware
  • Onboard OSD
    • Graphic OSD (STM32)
    • Full KISS Tuning
    • Filter (PIDs, Rates, Settings)
    • LED control (RGB LED, Racewire)
    • VTX
    • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
    • KISS GPS support + live map
    • Custom graphic pilot logo
    • Stick overlay
    • Custom layout
    • can be deactivated for usage of digital systems
  • Connector type: JST-SH-1mm

 PINMAP

Includes:

1X FETtec KISS FC G4
- 1X 8 Pin SH1.0 Cable
- 1X 6 Pin SH1.0 Cable
- 4X M3 Anti-Vibration Silicone Grommet Insert

Manual:

Holybro FETtec FC G4 Manual

More relevant product options

No related record found