Home>DIY RC Drone Accessories>Flight Control>Happymodel Crazybee F4 Lite 1S Flight Controller with Runcam Nano3 FPV Camera & Canopy for Mobula 6 Tiny Whoop Mobula6 1S 65mm Brushless Whoop Drone

Happymodel Crazybee F4 Lite 1S Flight Controller with Runcam Nano3 FPV Camera & Canopy for Mobula 6 Tiny Whoop Mobula6 1S 65mm Brushless Whoop Drone Item NO.: F34974-B/F34974-C

Name: Happymodel Crazybee F4 Lite 1S Flight Controller with Runcam Nano3 FPV Camera & Canopy for Mobula 6 Tiny Whoop Mobula6 1S 65mm Brushless Whoop Drone
Brand: Happymodel
SKU: F34974-B/F34974-C
Price: 67.9 USD
Availability: SoldOut
Rating: 5 (1 reviews)

5.0

(1)

Sold (12)

US$ 67.90

Sold Out

Product Name	Happymodel Crazybee F4 Lite 1S Flight Controller with Runcam Nano3 FPV Camera & Canopy for Mobula 6 Tiny Whoop Mobula6 1S 65mm Brushless Whoop Drone
Item NO.	F34974-B/F34974-C
Weight	0.056 kg = 0.1235 lb = 1.9753 oz
Category	DIY RC Drone Accessories > Flight Control
Brand	Happymodel
Creation Time	2019-12-30

Happymodel Crazybee F4 Lite 1S Flight Controller with Runcam Nano3 FPV Camera & Canopy for Mobula 6 Tiny Whoop Mobula6 1S 65mm Brushless Whoop Drone

Package Included:
1 x Happymodel Crazybee F4 Lite 1S Flight Controller
1 x Camera Canopy
1 x Runcam Nano3 FPV Camera

Happymodel Crazybee F4 Lite 1S Flight Controller Built-in 5.8G VTX FC/ESC/RX/VTX 4in1 for Mobula 6 Tiny Whoop Mobula6 1S 65mm Brushless Whoop Drone

Flight controller (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
Built-in voltage detection
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_5_REV16_7.HEX
Default protocol: DSHOT600
Onboard Frsky SPI D8 receiver Version SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model
Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Onboard Flysky SPI receiver Version SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support
Onboard 5.8g VTX Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band
Smartaudio ready
Model: RunCam Nano 3
Image Sensor: 1/3″ CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160°
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm

Brand Name: Happymodel
Item Name: Camera Canopy for Mobula6
Material: PP
Color option: Transparent Black
Net Weight: 1g
Camera angle could adjustable easily
Best for Runcam Nano3

Share this Product