Home>Computer Accessories>HI-LINK serial port to WiFi+Bluetooth dual-mode module B35 low-power remote transparent AP/STA/BLE5.0

HI-LINK serial port to WiFi+Bluetooth dual-mode module B35 low-power remote transparent AP/STA/BLE5.0 Item NO.: F51354

US$ 1.78 ~ US$ 1.98

Quantity	0-3	4-50	51-100
Discount	0% OFF	5% OFF	10% OFF
Price	US$ 1.98	US$ 1.88	US$ 1.78

Quantity: Stock ( 9999999 )

Estimate Shipping Cost

Product Name	HI-LINK serial port to WiFi+Bluetooth dual-mode module B35 low-power remote transparent AP/STA/BLE5.0
Item NO.	F51354
Weight	2023 kg = 4459.9516 lb = 71359.2250 oz
Volume	1 CBM
Category	Computer Accessories
Creation Time	2023-12-11

HI-LINK serial port to WiFi+Bluetooth dual-mode module B35 low-power remote transparent AP/STA/BLE5.0

Serial to WiFi+BLE Bluetooth module

Supports 802.11b/g/n and BLE 5.2 protocols

2.4G/1T1RWiFi, BLE 5.2

288KBSRAM/2MB FLASH

Supports hybrid modes of AP, STA, and BLE

Support BLE to quickly assist in network distribution

Rich interfaces, supporting UART/PWM/GPIO/ADC/I2C/SPI

Reception mode~30mA, low power consumption

Product Introduction

Production INTRODUCTION

B35S is a low-power embedded WiFi+BLE dual protocol module.

It consists of a highly integrated wireless RF chip and a small number of peripheral devices,

Built in WiFi network protocol stack and rich library functions.

Wi Fi 802.11b/g/n and BLE 5.2 baseband/MAC design,

Built in 288KRAM, 2Mbyte Flash, and abundant peripheral resources.

Technical Specifications

Wireless parameters

Wireless standard IEEE 802.11b/g/n Bluetooth standard BLE 5.2

Frequency range 2.412-2.484GHz

Transmission power WiFi: 18-19dBm/Bluetooth: 10dBm (MAX)

Receiving sensitivity -98dBm

antenna

Antenna type: External antenna (can be changed to onboard antenna)

Hardware parameters

Hardware interface UART/PWM/GPIO/SPI/ADC

Working voltage~30mA/peak 400mA

GPIO driver Max: 12.8mA

Working current 3.3V (2.7V~3.6V)

Software parameters

Wireless Network AP/STA/BLE

Security mechanism WEP/WPA-PSK/WPA 2-PSK

Encryption type WEP 64/WEP 128/TKIP/AES

Firmware upgrade, serial port upgrade

Network protocols IPv4, TCP/UDP, Lwip

User configured AT+instruction set

Other parameters

Appearance size 24 × sixteen × 1.6mm

Environmental standard: Working temperature: -40-+85 ℃ Working humidity: 10% -90% RH (non condensing)

Storage temperature: -40-+85 ℃ Storage humidity: 10% -90% RH