FEICHAO T143 Mini Drone with Camera FPV RC Racing Drone Quadcopter with 3in Propelles
Airframe: T143 Traverse machine carbon fiber rack board carbon fiber twill matte finish without screws
Canopy: 3D Printed TPU 14mm Installation Width Camera Mount Bracket Holder Fixed Protective Seat
Motor: MT1204 1204 5000KV 2-4S Brushless Motor
Configu-ration:9N12P
Stator Diamter: 12mm
Stator Length: 4mm
Inner Shaft Diameter: ©ß2mm
Outer Shaft Diameter: ©ß1.5mm
Motor Dimension(Dia.*Len): ©ß15mm*16.2mm
Flight controller: F411 20A/35A AIO 2S-6S BLHELI_ S Flight Controller MPU6000 Built in ESC
- Flight control parameters:
CPU: STM32F411CEU6
IMU: MPU6000
OSD: AT7456E
Barometer: BMP280
LED: Support WS2812 and other programmable
Sensor: Built-in current sensor
Firmware version: betaflight_4.1.1_MATEKF411
Compatible Receiver: Frsky/ Futaba/ Flysky/ TBS Crossfire/ DSM-X: DSM-2 receiver
- ESC parameters:
Firmware support: BLHELI_ S
Protocol support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 2S-5S Lipo
Continuous current: 20A/35A (optional)
Peak current: 25A
Firmware version: BLHELI _S (G- H-30)
VTX: 5.8G 40CH 25mW 100mW 200mW Switchable FPV Transmitter with Antenna
Input Voltage: 4.5-5.2V(DC) ??
Input Current: 500mA@200mW ?
Power: 25mW/ 100mW/ 200mW ( Switchable) ? ?
Channel: 40CH ??
Antenna Conenctor: IPEX
Size: 37x24x5mm?
Mounting Hole: 25x25mm
Weight: 2g
Propellers: 3016 Propeller 1.5m 2mm Hole 3 inch 3-Paddle CW CCW Propellers Mini Props
Buzzer: 5V Buzzer Alarm Beeper
Camera: 1200TVL 2.1mm 1/3 CMOS 16:9 4:3 Mini FPV Camera Micro Cam NTSC
Optional Parts:
Battery & Charger:?PFV 650mAh 3S 80C 11.4V lithium battery XT30 plug with?B3 PRO Compact 2S 3S Lipo Balance Battery Charger
Receiver for Flysky: RX2A IBUS PPM FS-RX2A Pro Receiver Mini Receiver Compatible with Flysky FS-TM8 FS-TM10 FS-I10 FS-I6 FS-I6X FS-I6S Transmitter Accessory
Receiver for FRSKY D8:?D800 Tiny 8CH SBUS / PPM Receiver Compatible with FRSKY ACCST D8 and X9D(Plus)
with RX&TX for Flysky
with RX&TX for FRSKY
Notes:
1. Please do not charge the battery when you are not at home. Please do not charge the battery immediately after it has flown.
2. Do not modify any parameters and wiring without knowing the flight control and remote control.
3. Turn on the remote control before giving power to the plane. After the flight, turn off the power control before turning off the remote control to prevent accidents.
4. The product is unassembled/welded parts. If there is any technical or assembly problem, please feel free to contact us. If the customer needs to assemble, please also feel free to contact us, we will give a reasonable quotation for additional logistics freight and technical assembly fee.
5. This product is not a toy and is not suitable for children under 14.
6. If you are a beginner, an experienced adult is recommended
7. Beginners should be careful not to use their hands to take the plane or let the children take it to avoid being scratched when the plane is turning
8. Please turn off the starting switch in time when the plane falls into the wall or hits other objects during flight, otherwise damage may be caused to the flight control motor, etc. Check whether the plane is damaged or the screws are loosened, and then take off again when everything is normal
No related record found