Mantis 85 Micro FPV Racing Drone Mantis85 85mm Quadcopter BNF with Mini FPV Watch Frsky D8 / Flysky 8ch Receiver

Mantis 85 Micro FPV Racing Drone Mantis85 85mm Quadcopter BNF with Mini FPV Watch Frsky D8 / Flysky 8ch Receiver Item NO: F18526-A/F18526-B

US$ 92.98 (10% Off)
US$ 103.31 Save US$ 10.33
Version:
With Flysky Receiver With frsky receiver
Remark:
Customized Requirements
Quantity:
Shipping Cost:
Estimate Shipping Cost
Product Name Mantis 85 Micro FPV Racing Drone Mantis85 85mm Quadcopter BNF with Mini FPV Watch Frsky D8 / Flysky 8ch Receiver
Item NO F18526-A/F18526-B
Weight 0.4220 kg = 0.9304 lb = 14.8856 oz
Category RC Toy Drone
Brand Happymodel
Creation time 2018-09-26

Mantis 85 Micro FPV Racing Drone Mantis85 85mm Quadcopter BNF with Mini FPV Watch Frsky D8 / Flysky 8ch Receiver

Specifications:
Item Name:Mantis 85 Micro FPV RACING DRONES BNF
Size:100mm*100mm*25mm
Weight: 52g( battery not include)
Flight controller: Super_S F4 Flight controller built-in Betaflight OSD
Motor: Happymodel SE1102 KV9000 brushless motor
Propeller: 1935 3-blades propeller
Camera: 600TVL HD CMOS 1/4inch
VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter
Battery: 7.4V 400mah 30C lipo battery
OSD: Betaflight OSD
Firmware of Flight controller :Betaflight 3.2.0
Flight time : 4minutes
Buzzer Ready


BNF version Receiver Option:
-Frsky D8 modee SBUS receiver (RSSI ready)
-Flysky 8ch AFHDS 2A receiver


Flight controller Specification:
-Size:20mm*20mm*5mm
-Mount hole: 16mm*16mm
-Processor: STM32F405RGT6 MCU
-Sensor: SPI Sensor MPU6000
-Built-in Betaflight OSD ( Batt voltage, RSSI , Artificial Horizon , Fly mode , -Flytime, Craft name etz.)
-Firmware version: Betaflight 3.2.0 Dshot
-Target: OmnibusF4SD


ESC specification:
-Size:25mm*29mm*5mm
-Mount hole: 16mm*16mm
-Firmware version: BLHELI_S 16.5
- BB2, 48MHZ Chip
-Lipo Battery: 1-2S
-Con. Current: 6A
-Peak Current: 10A (5S)
-BEC: No
-Programming: YES
-Betaflight passtrough ready
-Dshot600 ready(Default)
-Support oneshot42 oneshot125 Multishot Dshot

Features:
- 3K full carbon fiber bottom plate set up with  CNC aluminum alloy Stiffeners
- Extremely light and more powerful
- STM32F405RGT6 MCU+ BLHELI_S ESC make your Operating feel more stabile and silky
- Adjustable Angle of Camera
- Jaw-dropping flight performance
- Betaflight support
- Acro mode / Air mode /Angle mode support
- Built-in OSD(Using F4 MCU controls OSD over SPI bus in DMA mode)
- OSD Configuration has been include in BETAFLIGHT GUI
- Radio Stick to control PID Tunes
- BLEHELI_S pass-through ready
- Telemetry RSSI Output ready


FPV Watch:

Specification:
Screen: 2" TFT LCD display.
Resolution: 480*240
Brightness: 450 cd/m2
Contrast: 500:1
Antenna: included
Channel: single way 5.8G input, 4 frenquency ranges 32 channel optional.
Battery: 500mA lithium battery, charging time 90m usage time about 100m.
Power loss: 320 mA 3.7V (Max)
Working enviroment: -10~+65 C Degree
Antenna: Built-in 3dbi brass 5.8G antenna
Power button: boot or shutdown
CH button: Long Press to adjust frequency ABEF ; Short Press to adjust frequency 12345678
Battery: Built-in 500mA lithium battery
Charge indicator: red light when charging, red light off when the battery is fully charged 
Channel indicator: indicates the current receiving frequency, such as: E1, corresponding to the red lights of E and 1 will on.
Charging port: micro USB + 5V (use only rechargeable)
Charging current: 500mA
Charging time about 90 minutes
Time about 100 minutes


Package include:
1 x Happymodel Mantis 85 Frame kit
1 x Super_s F4 Flight controller build-in Betaflight OSD
1 x FrskyFlysky Receiver(optional)
4 x Happymodel SE 1102 KV9000 brushless motor
1 x Super_S BS06D 4 in 1 ESC Dshot600
4 x 1935 3-blades propeller CW
4 x 1935 3-blades propeller CCW
1 x 600TVL HD CMOS 1/4 inch  camera
1 x 5.8g 25MW 48CH NTSC/PAL VTX with Raceband
1 x 7.4V 400mah 30C lipo battery
1 x Buzzer
1 x FPV Watch



No related record found