F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with 4in1 28A / 35A ESC 2-4S DSHOT VS Flytower Drone

Copy and share this link on social network or send it to your friends

Copy

F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with 4in1 28A / 35A ESC 2-4S DSHOT VS Flytower Drone Item NO.: F25773/F25774

5.0
(1)
Write a Review
US$ 34.69 (5% Off)
US$ 36.52 Save US$ 1.83
type:
F4 Flight Tower 28A F4 Flight Tower 35A
Quantity:
Shipping Cost:
Estimate Shipping Cost

Product Name F411 Mini Micro F4 Betaflight OSD to Adjust PID BEC Flight Controller Tower with 4in1 28A / 35A ESC 2-4S DSHOT VS Flytower Drone
Item NO. F25773/F25774
Weight 0.015 kg = 0.0331 lb = 0.5291 oz
Category DIY RC Drone Accessories > Flytower
Brand jmt
Creation Time 2018-08-29

F411 Mini Micro F4 Build-in Betaflight OSD to Adjust PID BEC Flight Controller Tower with 4in1 28A / 35A ESC 2-4S DSHOT MultiShot VS Flytower for 85mm-250mm RC Drone Quadcopter
 

Specifications




Pay attention:
-The FSD F411 flight controller will support a gyro loop rate of up to 32khz however maximum pid loop frequency is limited to 16khz. To run at this speed you will need to overclock the CPU by entering the code: Set cpu_overclock = 120mhz in CLI.

-In betaflight 3.4.0 and above CPU temperature can be monitored directly in betaflight osd.



-We suggest to match FSD 35A 4in1 ESC with 2205(<2600kv)-2207(<2500kv) motors.
-This combo is the best after we testing many times and we seek truth from facts but don't boast.


FSD F411 FC Betaflight firmware download:
Betaflight_3.3.3_FULLSPEEDF411.hex

Betaflight_3.4_FULLSPEEDF411.hex

Betaflight_3.5.0_FULLSPEEDF411.hex

Butterflight_3.5.0_FULLSPEEDF411.hex

Specification:
Brand name: JMT
Item name: FSD428 Flight Tower
Weight: 7.8g
Usage: for 85mm-250mm Frame Kit
 
JMT F411 Flight Controller Board
CPU: STM32 F411
Input Voltage: 2-4S Lipo 
Built-in Betaflight OSD to adjust PID
BEC Output: 5V/3A
Size: 27.5x27.5mm board, 20mm mounting holes (M2)
Weight:3.4g
Support SBUS/PPM/DSM receiver 
 
JMT 28A BLHeli_S 2-4S ESC 
Input Voltage: 2-4S Lipo battery
Constant Current: 28A
BEC Output: NO
Size: 27x27mm (main board)
Installing Hole:20x20mm,M2
Weight: 4g
MOS Tube: TOP QUALITY MOSFET
Protocol: DSHOT600/300/150/Oneshot125/42,MultiShot

JMT 35A BLHeli_S 2-4S ESC
Input Voltage: 2-4S Lipo battery
Constant Current: 35A
BEC Output: NO
Size: 27x27mm (main board)
Installing Hole:20x20mm,M2
Weight: 5.1g
MOS Tube: TOP QUALITY MOSFET
Protocol: DSHOT600/300/150/Oneshot125/42,MultiShot

F411 Flight Tower with 28A 4in1 ESC 
Package Included:

1x F411 Flight Controller
1x 28A 2S-4S 4in1 ESC


F411 Flight Tower with 35A 4in1 ESC 
Package Included:

1 x F411 Flight Controller
1 x 35A 2S-4S 4in1 ESC
1 x 6 Pin Cable
8 x M2x5 standoffs 5mm tall Nylon
4 x M2 Nylon Nuts

2018-12-20

V****V

Cheap and cheerful. Only couple of UARTS, no current sensor, but it’s compact, light and at xt~xinte price probably the cheapest 28A F4 stack you can find. Very good value for money, highly recommended.

You May Also Like