4 solid days of running the fan is starting to make noise
2019-01-27
S****e
4 solid days of running the fan is starting to make noise
2019-01-16
A****F
The heatsink is great, the fan runs strong, they only have 2 screws holding the fan on the heatsink even though there are 4 hole in the heat sink. The other 2 holes dont line up, so this is very poorly made
2019-01-16
A****F
The heatsink is great, the fan runs strong, they only have 2 screws holding the fan on the heatsink even though there are 4 hole in the heat sink. The other 2 holes dont line up, so this is very poorly made
2019-01-11
J****n
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
2019-01-11
J****n
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
2019-01-11
J****n
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
2019-01-11
J****n
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
2019-01-11
J****n
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
2018-11-26
br****p.
Little fan works! Missing 2 screws on the housing though.
2018-11-26
br****p.
Little fan works! Missing 2 screws on the housing though.
2018-11-26
br****p.
Little fan works! Missing 2 screws on the housing though.
2018-11-26
br****p.
Little fan works! Missing 2 screws on the housing though.
2018-11-26
br****p.
Little fan works! Missing 2 screws on the housing though.
2018-11-26
br****an
Little fan works! Missing 2 screws on the housing though.
2018-11-24
Xo****ox
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.
2018-11-24
Xo****ox
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.
F20656
Really good at cooling motors
Really good at cooling motors
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
Little fan works! Missing 2 screws on the housing though.
Little fan works! Missing 2 screws on the housing though.
Little fan works! Missing 2 screws on the housing though.
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.