Heat sink works well fan is junk fried out first install but put a better fan on it
2020-07-19
St****ch
Both arrived with only one mounting screw in the fan not even tight. Only 2 mounting holes line up with the fan. Very very cheaply made. As far as keeping the motor cool it works good. My motor was about 10-20 cooler. The only issue if your jumping/bashing it pops off. Running it on a castle 1/8 2200kv motor in a traxxas emaxx 3906
2020-07-19
St****ch
Both arrived with only one mounting screw in the fan not even tight. Only 2 mounting holes line up with the fan. Very very cheaply made. As far as keeping the motor cool it works good. My motor was about 10-20 cooler. The only issue if your jumping/bashing it pops off. Running it on a castle 1/8 2200kv motor in a traxxas emaxx 3906
2019-06-02
Am****er
I only got this because it matched my purple theme on my rc. The fan didn’t really seem to throw air so I just ended up taking it off but kept the heat sink on.
2019-06-02
Am****er
I only got this because it matched my purple theme on my rc. The fan didn’t really seem to throw air so I just ended up taking it off but kept the heat sink on.
2019-01-11
J****n
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
2019-01-11
J****n
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
2019-01-11
J****n
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
2019-01-11
J****n
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
2019-01-11
J****n
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
2018-11-24
Xo****ox
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.
2018-11-24
Xo****ox
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.
2018-11-24
Xo****ox
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.
2018-11-24
Xo****ox
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.
2018-11-24
Xo****ox
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.
2018-02-20
Am****er
Fast shipping. Fan is decent not to loud. The reason why 3 stars is its missing 2 screws but if u look carefully at the pictures it only show 2 screws
2018-02-20
Am****er
Fast shipping. Fan is decent not to loud. The reason why 3 stars is its missing 2 screws but if u look carefully at the pictures it only show 2 screws
2018-02-20
Am****er
Fast shipping. Fan is decent not to loud. The reason why 3 stars is its missing 2 screws but if u look carefully at the pictures it only show 2 screws
2018-02-20
Am****er
Fast shipping. Fan is decent not to loud. The reason why 3 stars is its missing 2 screws but if u look carefully at the pictures it only show 2 screws
F20656
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
The only thing I don't like about this heatsink is it is very loose fitting on every motor I tried. If you buy this, you will need to shim it with aluminum foil, or epoxy it to the motor.
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.
It works well keeping motor cool, I own a 2wd slash. The motor is a castle creations 5700kv and gets quite hot when punching the throttle. I can run 2 packs back to back no problem fitment is an issue and took some finegaling to get it to seat right. There about 1/4 of the motor that isn't covered due to transmission case. With a metal hop-up transfer case it would fit no problem.
Fast shipping. Fan is decent not to loud. The reason why 3 stars is its missing 2 screws but if u look carefully at the pictures it only show 2 screws
Fast shipping. Fan is decent not to loud. The reason why 3 stars is its missing 2 screws but if u look carefully at the pictures it only show 2 screws
Fast shipping. Fan is decent not to loud. The reason why 3 stars is its missing 2 screws but if u look carefully at the pictures it only show 2 screws