Copy and share this link on social network or send it to your friends
CopyProduct Name | BETAFPV M03 25-350mW 5.8G VTX Adjustable Power For 65mm-85mm Bwhoop Drones Quadcopter |
Item NO. | F45257 |
Weight | 0.013 kg = 0.0287 lb = 0.4586 oz |
Category | DIY RC Drone Accessories > VTX |
Brand | BETAFPV |
Creation Time | 2021-10-22 |
BETAFPV M03 25-350mW 5.8G VTX Adjustable Power for 65mm-85mm Bwhoop Drones Quadcopter
M03 VTX, a ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer range flying. Combining this VTX and the
excellent radio link ExpressLRS 2.4G, pilots canfly whoop drones longer to explore more possibilities and fun.
Bullet Point
With the 25-350mW output power, M03 VTX provides a stable image and strong transmission.
Only 1.1g and tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector
JST-0.8 is suitable with BETAFPV C02 camera.
Comes with IPX type of antenna, just plug and play, no extra solder work needed.
M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend to use it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A
FC (ELRS 2.4G).
Specification
Item: M03 5.8G VTX
Output power: 25/100/200/350mW (adjustable)
Supply voltage range: 4.5-5.5V
Weight: 1.1g (antenna not included)
VTX internal size: 18X14mm
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
Channel SEL: SmartAudio
Modulation type: FM
Frequency control: PLL
All harmonic: Max -50dBm
Frequency stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel carrier error: ±1.5dB
Antenna port: 50 Ω
Operating temperature: -10℃~+80℃
Camera connetor: JST-0.8, compatible with camera like BETAFPV C01, BETAFPV C02and NewBeeDrone BeeEye.
Diagram
Below is the diagram of the M03 VTX. The camera connetor is JST-0.8 and it is compatible with camera like BETAFPV C01,BETAFPV C02and NewBeeDrone BeeEye.
How to Connect with FC
Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G)board.
Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board.
Change Band & Channel & Power
M03 VTX could only use the Smart Audio port to change the band and channel. Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick
Left). Then FEATURES -> VTX SA to change the frequency point and power.
Switchable power includes 25mW, 100mW, 200mW and 350mW. Except the method via OSD menu as show above, the output power could be changed via the power
button.
Package
1 * BETAFPV M03 5.8G VTX (antenna assembled)
5 * 30AWG silicone wire (30mm)
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found