BETAFPV M01 AIO / A01 AIO Camera 5.8G VTX V2.1 With 1200TVL NTSC Camera 5.8Ghz 37CH 25mW FPV Transmitter for FPV RC Item NO.: F46203

M01 AIO Camera 5.8G VTX V2.1 is upgraded into a pin-connected version, easy to connect with the camera.  With the ultra-lightweight 2.72g. It comes with a super Mini 5.8GHz FPV Transmitter, 1200TVL FPV Camera (C02), and RG178 Antenna features 6 bands and 37 channels on the 5.8GHz band with Raceband which is perfect for Pro Series and Brushed Whoop Drone. 

Bullet Point

• Upgraded into pin-connected version, easy to assemble

• Lighter than Z02 AIO Camera VTX, perfect for Micro Drone 

• Suitable for Pro Series and Brushed Whoop Drone

• 30° tilt Camera Mounting hardware is provided to suit your preference

Specification

• Item: M01 Camera AIO VTX V2.1

• Camera: C02 FPV Micro Camera

• TVL: 1200TVL 

• FOV: H:120°/V:100°

• Video System: NTSC

• Horizontal Resolution: 640X480 1/4”

• Output power: 25mW

• Supply Voltage: 5V

• Size: 18*14*4.5mm(VTX)

• Weight: 2.72g

• Antenna: RG178 Antenna

• Frequency: 5.8GHz 6 bands 37 channels, with Raceband: 5362~5945MHz

Component Layout Diagram for M01 VTX V2.1

The following diagram describes the organization and wiring of the physical components on the M01 VTX V2.1 board.

How to Connect with FC

Here is the diagram about how to connect the VTX to  F4 AIO 1-2S FC.

Package

• 1 * BETAFPV M01 AIO FPV Camera VTX

• 1 * White Micro Canopy 

• 4 * M1.4x4mm screws

• 1 * 1/4'' Camera Mounting hardware

_______________________________________________________________________________________

Check it here to know more about the V1.0version

• Component Layout Diagram for M01 VTX V1.0

The following diagram describes the organization and wiring of the physical components on the M01 VTX board.

• How to Connect with FC

M01 VTX comes with pluggable pins, which is convenient assembly with brushed FC like F4 1S Frsky brushed FC

A01 AIO Camera 5.8G VTX is upgraded.

• Add JST0.8 connector on A01 VTX, plug-and-play design makes it easy to install to the camera without soldering.

• Replaced the welded antenna with an IPX type of antenna, just plug and play, no extra solder work needed.

The A01 AIO Camera combo is perfect for Pro2 Series whoop drone, which is integrated with A01 VTX, 5.8GHz FPV Transmitter, C02 Camera and Dipole Whip Antenna. It’s compatible with 5.8G FPV Goggle VR006.

Bullet Point

• Micro-sized, lightweight

• Integrated Camera and 0mW/25mW/200mW adjustable transmitter

• Support PitMode, power up VTX during race events without interfering

• Dipole whip high sensitivity antenna. It is mounted to the VTX board durable.

• Included with SmartAudio function. FC can communicate with the VTX by using the audio line-in, which allows FC to know what frequency the VTX is using, and to change it

• 30° tilt Camera Mounting hardware is provided to suit your preference

• SPECIFICATION

• Item: A01 AIO Camera 5.8G VTX

• TVL: 1200TVL 

• FOV: H:120°/V:100°

• Video System: NTSC/PAL（Switchable）

• Horizontal Resolution: 640X480 1/4”

• Output power: 0/25mW/200mW adjustable (Set output power on 0, to avoid frequency interference)

• Supply Voltage: 5V

• Size: 28x19x5mm(VTX)

• Weight: 3.2g

• Antenna: RG178 Dipole Whip Antenna

• Frequency: 5.8GHz 6 bands 37 channels, with Raceband: 5650-5925MHz

Component Layout Diagram for A01 VTX

The following diagram describes the organization and wiring of the physical components on A01 VTX board.

How to Connect with FC

A01 AIO VTX comes with port, convenient for installation

PACKAGE

• 1 * A01 AIO Camera 5.8G VTX

• 1 * 5-Pin FC Pluggable Cable

• 1 *White Micro Canopy 

• 4 * M1.4x4mm screws

• 1 * 1/4'' Camera Mounting hardware