|
| Quantity | 0-3 | 4-50 | 51-100 |
| Discount | 0% OFF | 5% OFF | 10% OFF |
| Price | US$ 24.27 | US$ 23.06 | US$ 21.84 |
Copy and share this link on social network or send it to your friends
Copy| Product Name | BETAFPV A01 AIO / M01 AIO Camera 5.8G VTX V2.1 With 1200TVL NTSC Camera 5.8Ghz 37CH 25mW FPV Transmitter for FPV RC Racing Drone |
| Item NO. | F46203F45591 |
| Weight | 0.035 kg = 0.0772 lb = 1.2346 oz |
| Category | DIY RC Drone Accessories > VTX |
| Brand | BETAFPV |
| Creation Time | 2021-12-11 |
M01 AIO Camera 5.8G VTX V2.1 is upgraded into a pin-connected version, easy to connect with the camera. With the ultra-lightweight 2.72g. It comes with a super Mini 5.8GHz FPV Transmitter, 1200TVL FPV Camera (C02), and RG178 Antenna features 6 bands and 37 channels on the 5.8GHz band with Raceband which is perfect for Pro Series and Brushed Whoop Drone.
Bullet Point
Upgraded into pin-connected version, easy to assemble
Lighter than Z02 AIO Camera VTX, perfect for Micro Drone
Suitable for Pro Series and Brushed Whoop Drone
30° tilt Camera Mounting hardware is provided to suit your preference
Item: M01 Camera AIO VTX V2.1
Camera: C02 FPV Micro Camera
TVL: 1200TVL
FOV: H:120°/V:100°
Video System: NTSC
Horizontal Resolution: 640X480 1/4”
Output power: 25mW
Supply Voltage: 5V
Size: 18*14*4.5mm(VTX)
Weight: 2.72g
Antenna: RG178 Antenna
Frequency: 5.8GHz 6 bands 37 channels, with Raceband: 5362~5945MHz
The following diagram describes the organization and wiring of the physical components on the M01 VTX V2.1 board.
Here is the diagram about how to connect the VTX to F4 AIO 1-2S FC.
1 * BETAFPV M01 AIO FPV Camera VTX
1 * White Micro Canopy
4 * M1.4x4mm screws
1 * 1/4'' Camera Mounting hardware
_______________________________________________________________________________________
Component Layout Diagram for M01 VTX V1.0
The following diagram describes the organization and wiring of the physical components on the M01 VTX board.
How to Connect with FC
M01 VTX comes with pluggable pins, which is convenient assembly with brushed FC like F4 1S Frsky brushed FC
A01 AIO Camera 5.8G VTX is upgraded.
Add JST0.8 connector on A01 VTX, plug-and-play design makes it easy to install to the camera without soldering.
Replaced the welded antenna with an IPX type of antenna, just plug and play, no extra solder work needed.
The A01 AIO Camera combo is perfect for Pro2 Series whoop drone, which is integrated with A01 VTX, 5.8GHz FPV Transmitter, C02 Camera and Dipole Whip Antenna. It’s compatible with 5.8G FPV Goggle VR006.
Micro-sized, lightweight
Integrated Camera and 0mW/25mW/200mW adjustable transmitter
Support PitMode, power up VTX during race events without interfering
Dipole whip high sensitivity antenna. It is mounted to the VTX board durable.
Included with SmartAudio function. FC can communicate with the VTX by using the audio line-in, which allows FC to know what frequency the VTX is using, and to change it
30° tilt Camera Mounting hardware is provided to suit your preference
Item: A01 AIO Camera 5.8G VTX
TVL: 1200TVL
FOV: H:120°/V:100°
Video System: NTSC/PAL（Switchable）
Horizontal Resolution: 640X480 1/4”
Output power: 0/25mW/200mW adjustable (Set output power on 0, to avoid frequency interference)
Supply Voltage: 5V
Size: 28x19x5mm(VTX)
Weight: 3.2g
Antenna: RG178 Dipole Whip Antenna
Frequency: 5.8GHz 6 bands 37 channels, with Raceband: 5650-5925MHz
The following diagram describes the organization and wiring of the physical components on A01 VTX board.
A01 AIO VTX comes with port, convenient for installation
1 * A01 AIO Camera 5.8G VTX
1 * 5-Pin FC Pluggable Cable
1 *White Micro Canopy
4 * M1.4x4mm screws
1 * 1/4'' Camera Mounting hardware
Email：yxy@xt-xinte.com
Wechat:15012645226
No related record found