ADT-Link USB 3.0 Micro-B To Micro-B Ribbon Flat EMI Shielding Flat OTG Cable FPC USB 3.0 Micro B 90 Degree Angle Up Downward Item NO.: F41386-F41387-F41388-F41389-F41390-F41391-F41400

ADT-Link USB 3.0 Micro-B To Micro-B Ribbon Flat EMI Shielding Flat OTG Cable FPC USB 3.0 Micro B 90 Degree Angle Up Downward 

Product description:
Brand: ADT-Link
Colour: Black
Size: 15cm   
Product model: UWW3 series products
Product name: USB 3.0 Micro-B to Micro-B OTG adapter cable
Wire length: 0.03m-3m (support length customization, if you need other lengths, please contact us to change the price, thank you!)
Adaptation range: micro-B to micro-B male connector at both ends
Speed bandwidth: USB 3.0 standard 5G/bps high speed
Current capacity: 3A (measured to support 3A within 50cm, 1.5A within 1 meter)
Product application: From the end microUSB 3.0 hard disk box, camera and other devices to the host computer host, micro motherboard, mobile phone micro-B 3.0 port

Purchase restrictions: This product is designed to connect micro-USB devices to the micro-USB OTG port of the micro motherboard. It is not suitable for general external use. It is limited to the designation of product engineers. Individual buyers are not allowed to place orders. The structure of this product is fragile and fragile, not suitable for civilian use, not easy to use for general purposes, and does not support return and exchange. Please consider carefully before placing an order

Procurement Tips: Be sure to buy 1~2 samples first, and then purchase in bulk after testing and verification. Wire length refers to the visible wire part, excluding PCB and connectors.

Application Tips: The default two ends support OTG welding ID. If you want to connect both ends of the extension cord to the Host motherboard, the extension cord needs to distinguish between the master and slave ends. Please contact customer service for customization.

Product advantages:
Material advantages: use German patented imported wire, use high-quality gold-plated connectors, high-frequency support for stable transmission of USB3.0. The PCB is made of high-quality materials with high frequency and low resistance. The PCB is made of precision. The PCB is made of high TG plates. The thickness of the copper material is thickened to 1oz; the connector is gold-plated and has good electrical conductivity, which can reduce the black screen and blue screen splash caused by the increase in oxidation, rust and resistance Huaping problem.

Design advantages: Differential signal no via design, no CAF micro short circuit phenomenon, high-speed signal data transmission, no parasitic capacitance and parasitic inductance signal attenuation interference, power circuit strengthened wiring design, PCB board miniaturization design, can reduce mechanism interference , No card hardware, easy product installation.

Production advantage: Our shop is a factory direct sales, customized products are produced, and the metal welding points are strengthened during production. And put on heat shrinkable tube protection, the product is sturdy and reliable, and there will be no disconnection problems. The products are well made, stable, reliable and durable.