ADT-Link PCIE 3.0 Cable PCI-E x16 3.0 Adapter Cable Graphics Video Cards Extension 90 Degree Angled for ITX Motherboard Chassis

Brand: ADT-Link

Colour: Black

Weight: 70g

    

product description:

R33UF-TU double reverse (the gold finger end is reversed, the connector end is reversed)

R33UL corner (the gold finger end is reversed, and the connector end is 90 degrees)

Wire length: 190mm (support customized length of 15-25cm, if you need other lengths, please contact us to change the price, thank you!)

Adapted graphics card: GTX1080ti RTX2080ti Titan XP radeon RX580 VEGA64 quadroK2200 professional graphics card, supporting the new graphics card that has been out of the factory in the past three years.

Speed Bandwidth: PCIe 3.0 x16 (gen3, 128G.s) (Extension cable does not support PCIe4.0, please set the speed to below 3.0 in BIOS.)

Compatible chassis: ITX customized chassis (Because the chassis often changes design, please confirm the specifications of the graphics card extension cable with the chassis seller before purchasing.)

Note: The length of the wire refers to the part of the visible wire, excluding PCB and connectors.

Product advantages:

1. Wire advantage, use anti-interference low resistance wire, use imported connector, high frequency support PCIe 3.0 X16 8G/bps stable transmission

2. Cable length advantage, from 15cm to 60cm can be customized, the adapter sold in our store, the cable impedance is low, the cable length within 60 cm can stably support PCIe3.0 full speed.

3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable.

4. The product is made of high-quality materials, the PCB is made of precision, the PCB uses high TG plates, and the thickness of the copper material is thickened to 1oz. The gold finger has sufficient gold plating content and the gold plating foot has good electrical conductivity, which can reduce the blue screen of crash caused by increased oxidation and rust resistance. Support PCIe graphics cards that have been out of the factory in the past three years.

5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.

6. The PCB is designed with short and fattening so that it will not get stuck on the graphics card. The fattening and longer design makes the board easier to install and reduces the chance of damage.