iFlight TurboBee 77R SucceX Mirco F4 12A 4-IN-1 ESC 1103 Brushless Motor RUNCAM Nano Mirco Camera 2-3S  RC FPV Race Drone Quadcopter BNF

Copy and share this link on social network or send it to your friends

Copy

iFlight TurboBee 77R SucceX Mirco F4 12A 4-IN-1 ESC 1103 Brushless Motor RUNCAM Nano Mirco Camera 2-3S RC FPV Race Drone Quadcopter BNF Item NO: F28808-F28809-F28810-F28811-F28812

US$ 136.99
Version:
BNF with DSM2 RX BNF With Flysky FS-A8S V2 RX BNF With FUTABA FASST MINI SUBS RX BNF With Frsky XM+ RX BNF With R-XSR RX
Remark:
Customized Requirements
Quantity:
Shipping Cost:
Free Shipping
  • iFlight TurboBee 77R SucceX Mirco F4 12A 4-IN-1 ESC 1103 Brushless Motor RUNCAM Nano Mirco Camera 2-3S RC FPV Race Drone Quadcopter BNF
Product Name iFlight TurboBee 77R SucceX Mirco F4 12A 4-IN-1 ESC 1103 Brushless Motor RUNCAM Nano Mirco Camera 2-3S RC FPV Race Drone Quadcopter BNF
Item NO F28808-F28809-F28810-F28811-F28812
Weight 0.1000 kg = 0.2205 lb = 3.5274 oz
Category DIY RC Drone Kit / RC Drone Accessories > DIY RC Drone Kit
Brand iFlight
Creation time 2019-05-06

iFlight TurboBee 77R SucceX Mirco F4 12A 4-IN-1 ESC 1103 Brushless Motor RUNCAM Nano Mirco Camera 2-3S  RC FPV Race Drone Quadcopter BNF


Specifications :

- Frame Wheelbase: 77mm
- Bottom plate thickness: 1.5mm
- Top board thickness: 1mm
- Flight control pitch: 16x16mm 20x20mm
- Fpv cam spacing: 19mm
- Top and bottom plate spacing: 22mm (aluminum column height
- Build Weight: 55g
- SucceX Micro 16x16 Tower 2-4S
- iFlight 1103 motors (1.5mm shaft)
- Caddx.us Turbo Eos2 Camera
- Gemfan 1635 40mm 3 blades 1.5mm shaft propeller
- iFlight Prop Guards 40mm

SucceX Mirco F4 Flight Tower System 16x16mm
SucceX F4 Flight Controller

-STM32F411
-Input voltage 2-4S LIPO
-Gyro: MPU6000
-2x UART ports
-4x motor outputs
-OSD inbuilt
-No Blackbox FLASH
-BEC 5V 2A Cont.
-Size: 21mm*21mm
-Mounting holes: 16*16
-Weight: 2.5g
-BF target: MATEKF411

SucceX Mirco 12A Brushless ESC

-Firmware: BlheliS
-Input voltage : 2-4S LIPO
-Continuous current: 12A
-MCU: BB21F16G
-BEC: None
-ESC protocol: PWM, oneshot125, multishot, dshot150, 300, 600, etc.
-Size: 23mm*21mm
-Mounting hole 16*16mm
-Weight: 2.7g

SucceX Mirco VTX-Power: PIT/25/100/200mW

-Antenna interface: IPEX (UFL)
-Telemetry: IRC Tramp
-Size: 17mm*27mm
-Mounting holes: 16*16mm
-Weight: 1.6g

VTX control implementation:
-VTX can be conveniently set up in your OSD.


Features:
1. Share the self-developed paddle protection ring with the bee machine 75HD, and it can be used detachably;
2. Share 3D printing accessories with bee machine 75HD;
3, 16 * 16 flying tower, safe and reliable and small and exquisite;

The kit configuration list includes the following products:
iFlight 77R Gecko Rack *1 set
iFlight SucceX Mirco F4 Flight Control *1
iFlight SucceX Mirco 12A 4-in-1 ESC *1
iFlight SucceX Mirco VTX image transmission *1
iFlight 1103 .2-3S *4
Caddx.us Turbo Eos2 FPV Camera 2.1mm 16:9 NTSC/PAL (Optional) *1
Dry and rich red 40mm 3 leaves 1635-3 1.5mm*4 pairs
iFlight black 10*100mm cable tie *2
iFlight black 10*125mm cable tie*1
iFlight black 3D print complete set *1 set
iFlight black 40mm paddle cover set *1 set
Small antenna protection tube 40CM* 2
Antenna cap (black) * 2
XT30 male with line *1
Ipex (UFL) interface 5.8G picture transmission antenna (8CM) * 1 root
iFlight 90 degree L-shaped right angle USB adapter version FPV Racing Drone dedicated adjustment extension board *1



No related record found

You May Also Like