Home>DIY RC Drone Accessories>iFlight The Force Long Range 5.8G 1W 48ch Transmitter Module 25mw 200mw 400mw 800mw 1000mw Video Transmission FPV VTX For FPV Racing Drone
iFlight The Force Long Range 5.8G 1W 48ch Transmitter Module 25mw 200mw 400mw 800mw 1000mw Video Transmission FPV VTX For FPV Racing Drone

iFlight The Force Long Range 5.8G 1W 48ch Transmitter Module 25mw 200mw 400mw 800mw 1000mw Video Transmission FPV VTX For FPV Racing Drone Item NO.: F31051

Write a Review
US$ 22.09
US$ 25.99 Save US$ 3.90 (15% Off)
Sold Out

Copy and share this link on social network or send it to your friends

Copy
Product Name iFlight The Force Long Range 5.8G 1W 48ch Transmitter Module 25mw 200mw 400mw 800mw 1000mw Video Transmission FPV VTX For FPV Racing Drone
Item NO. F31051
Weight 0.056 kg = 0.1235 lb = 1.9753 oz
Category DIY RC Drone Accessories
Brand iFlight
Creation Time 2019-08-20

iFlight The Force Long Range 5.8G 1W 48ch Transmitter Module 25mw 200mw 400mw 800mw 1000mw Video Transmission FPV VTX For FPV Racing Drone

Specification:
Brand name: iFlight
Item name: The Force Long Range 1W VTX
Input voltage: DC 7-28V
Input current: +12V/500mA@1000mW
Output power: 25mW/200mW/400mW/800mW/1000mW switchable
Channel: 48CH
Connector: MMCX (with sma/rp-sma extension cable)
Size: 36x36x8mm
Mounting hole: 4-M3
Weight: ≤11g(excluding antenna)

Features:
- Support OSD Frequency and Power tuning;
- The output power is stable, the far transmission distance: ≥10km
- Transmit power 5 gear switch: 25mW/200mW/400mW/800mW/1000mW;
- Output 48 frequency points, and has 6 group 8 race frequency at the same time using each other without interference;
- Frequency lock fast, the boot does not interfere with companions;
- Built-in output power self-check function;
- Full format video format: NTSC /PAL;
- Wide input voltage range. low power consumption:
7V-28V +12V/500mA@1000mW;
- Small size: 36mm×36mm×8mm;
- Mounting holes 4-M3
- Lightweight: ≤11g(excluding antenna)

How to switch frequency and power
1.BetaFlight Firmware
2.CH & FR Switching
Short press Function Button once to change CH(CH1-CH8)
Long press Function Button for 2 seconds and then short press to change FR A b E F r L
3.Power Switching
Long press for 10 seconds and then short press the button to change Power
25mW/200mW/400mW/800mW/1000mW
Power Diagram:
Power Indicator: Red
25mW: Flash 1 time stop for 3 seconds
200mW: Flash 2 times stop for 3 seconds
400mW: Flash 3 times stop for 3 seconds
800mW: Flash 4 times stop for 3 seconds
1000mW: Flash 5 times stop for 3 seconds
0mW/fault: Always on

Notice:
* Please ensure that antenna is installed on the output terminal of VTX before powering to avoid damage of internal components;
* Please note that input voltage is underspecified range; positive and negative polarities of output terminal are on right position to avoid damage of internal components;
* If the antenna is needed to be replaced, please choose an antenna with a good standing wave and gain effect to achieve a longer transmission distance;
* Pay attention to ESC protection during transportation and installation;

Package Included:

1 x The Force Long Range 1W VTX




No related record found