XT-XINTE PCIE X16 Extension Line x16 Male to Male Female to Female Pcie TX-RX Signal-Exchange Cable PCIe3.0x16 Gen3 128G/bps R33 Series Item NO.: F45536-B1 B2 F45537 F45538 F45539 F45540-F45543

XT-XINTE PCIE X16 Extension Line x16 Male to Male Female to Female Pcie TX-RX Signal-Exchange Cable PCIe3.0x16 Gen3 128G/bps R33 Series

Product model: R33SS, R33FF, R33LR, R33NS, R33NF, R33NL, R33NR, R33VF (R33 series)
 
Product name: pci-e X16 signal docking cable
Length of wire: 5-100cm (support line length customization, different line length has different price, line length customization, please contact customer
service to change the price and then pay)
Speed and bandwidth: pcie3.0x16 gen3 128G/ BPS
Product functions: industrial control server equipment connection, PCIe signal high-speed transmission
Description of length: the length of wire in our shop is the part of wire, excluding PCB and connector.If PCB and connector are included, add another 4cm
or so.

Product advantage
1.Advantages of wire, imported wire with German patent, connector imported from Taiwan, support PCIe 3.0 full speed stable transmission
2.Line length advantage, from 3 cm to 1 m can be customized, the shop sales of the transfer wiring, wire impedance is low, line length within 60 cm support
PCIe3.0 full speed.
3.The differential signal has no hole design, and there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and
no CAF micro-short circuit phenomenon. The product is durable
4.The products are made of high quality materials, PCB is made of fine workmanship, copper is thickened to 1oz, gold finger has enough gold plating content
and good electrical conductivity, which can reduce the problem of dead blue screen caused by increased oxidation rust impedance.
5.The wire selected by the product itself is very durable, the use of the thickness of 3mm PCB gasket protection in the metal welding point, and lock the
screw and hexagon nut fastening, the product is solid and reliable tensile resistance, anti-interference, there will not be broken wire nail problem.
Wire can be bent or folded, do not affect the use.
6.PCB dwarfing and fatten design, dwarfing will not be stuck to the graphics card, fatten and lengthening design makes the board card easier to install,
reduce the probability of damage.
Precautions for purchase:
1. When inserting the cable, it is necessary to have a clear understanding of the direction, do not insert the socket in reverse or out of alignment, to
avoid burning the device. First hold the socket of the device before inserting the cable, to avoid cutting the socket pin too hard.No bending and no pulling
 within 2cm of the welding of the second end of the wire and the circuit board.
2. All kinds of motherboards and equipment signal driving ability and other conditions are not the same, the test results of our store do not guarantee the
same with your test results, as long as it is connected to the extension cord, the signal will be lost, the requirements of perfect, please do not buy.
3. A graphics card or motherboard is an electronic device that will age and oxidize over time, and the extension cord will only become more unstable.Old
devices are not supported.Your device is not supported for more than three years.Do not buy.