Copy and share this link on social network or send it to your friends
CopyProduct Name | Upgrade 75mm V2 Crazybee F4 Pro OSD 2S FPV Watch Goggles RC Racing Drone Caddx Eos2 Camera 25/200mW VTX Parking Apron & Air Gate |
Item NO. | F26814-M/F26815-M/F26814-Q/F26815-O/F27292-A/F27292-B/F26814-T/F |
Weight | 0.715 kg = 1.5763 lb = 25.2209 oz |
Category | DIY RC Drone Accessories > Motor |
Brand | JMT |
Creation Time | 2019-02-19 |
Note, All versions are welded & assembled & tested before shipped from the factory. They are ready to fly.
However, this version belongs to the Professional Remote model , But not belong to toys. Therefore, customers still need certain knowledge and operation experience for such products. If you are not familiar with the product, please do not change any programming settings casually.
If you have any questions, please feel free to contact us. Our technical department will do our best to handle the problem for you.
Specifications:
Item Name: 2S 75mm Brushless Whoop FPV Racer drone BNF/RTF Versions
Wheelbase: 75mm
Frame Kit: Mobula7 improvement frame , new materials, more durable, more light. 2 Colors optional, White and Black.
Version:
BNF FPV Version (Compatible with Frsky) / RTF FPV Version (Compatible with Flysky) ( Optional)
BNF FPV Version: Not include Remote Controller, FPV Watch and FPV Goggles are optional
RTF FPV Version: (Only Flysky Receiver) Ready to Fly, With Remote Controller, FPV Watch and FPV Goggles are optional.
(Note, The Version with FPV Watch, Include 4x Drone Lipo Batteries; The version with FPV Goggles, Only include 2x Drone Lipo Batteries)
Receiver ( Optional):
Compatible Frsky Receiver
Compatible Flysky AFHDS/ AFHDS-2A Receiver
(If you want to choose the version of Compatible DSM-2/DSM-X Receiver, Please feel free to message us)
Spare parts specifications:
SE0802 16000KV Motor |
Model: SE0802 KV: 16000KV Configu-ration: 9N12P
Stator Diamter: 8mm
Stator Length: 2mm
Shaft Diameter: Φ1.0
Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
Weight: 1.8g
Support 1-2S Lipo No.of Cells: 1S Lipo |
Flight controller |
(Frsky version) CRAZYBEEF4 PRO FR Firmware target: CrazybeeF4FR (Flysky version) CRAZYBEEF4 PRO FS Firmware target: CrazybeeF4FS (DSM2/DS MX version) CRAZYBEEF4 PRO Firmware target: CrazybeeF4DX CRAZYBEE F4 PRO Firmware target: CrazybeeF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1-2S battery input (DC 3.5-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready ESC MCU Upgraded to EFM8BB21 Built-in Betaflight OSD (SPI Control) Built-in Current meter sensor Max up to 28A Current meter scale set to 1175 Built-in 5V 1A Buck / Boost with LC filter Built-in voltage detection BLHELI_S pass-through Ready Multi Serial port support Fully compatible with almost Brushless whoop drone Weight:4.2g |
Onboard 4in1 ESC |
MCU upgraded to EFM8BB21 Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v) Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.Hex Default protocol: DSHOT600 |
Frsky NON-EUreceiver Version |
SPI BUS receiver Frsky D8/D16 switchable Compatible Non EU transmitter both D8 and D16 mode Channels: 8ch or 16ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
Flysky receiver Version |
SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 300m Failsafe support |
DSM2/DS MX receiver version |
Serial bus receiver Protocol: DSM2/DS MX compatible Channels:6-9 (Depend on your radio) No ground interference ( Transmitter and receiver 1 m from the ground): 300m |
Propeller |
40mm 3-blade Propeller Mix Color ( 10 CW + 10 CCW) |
VTX |
Output power: 25/200mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Antenna: RG178 antenna Frequency: 5.8GHz 5bands 40 channels With Raceband Smart Audio ready Weight: 3g700TVL FOV120 Camera |
CADDX EOS2 camera |
1/3" CMOS Sensor 1200 TVL 2.1mm lens 16:9 Image size NTSC Global WDR Internal Synchronization |
Lipo Battery |
Capacity: 300mAh Voltage: 3.8v Continuous Discharge Rate: 40C Instantaneous discharge rate: 80C Size: 55mmx11.5mmx6.5mm Weight: 7.8g Connector: PH2.0 *Notes: Need 2pcs batteries for Series circuit |
Charger |
Input: DC 7V-25V Output switchable: Fixed at 200~600 milliamps Cutoff voltage switchable: 4.20v cell charging cutoff (+- 0.5% margin of error) for 1S Lipo Battery 4.35v cell charging cutoff (+- 0.5% margin of error) for 1S 3.8V LIHV Battery - Supports Picoblade 1.25, PH 2.0mm battery - Supports LiHV 4.35v battery - Supports 6 Batteries charged at the same time - The display shows the each channel input and output voltage in order. - Charge at either 200mA or 600mA according to the setting of a switch that can be set independently for each port. - 2-6S (7.4V-22.2V)as power supply or use adapters with at least 2A battery output. |
FPV Watch (Optional) |
· Unique Charming New Product for FPV Photography. · FPV Watch with 5.8Ghz 32 CH wireless receiver, antenna inside. · 2" TFT LCD Display. · Convenient and easy to carry. Fashion and hot for boys, girls. · For outdoor helicopter, quadcopter. Perfect gift. Screen: 2" TFT LCD display. Resolution: 960*240 Brightness: 450 cd/m2 Contrast: 500:1 Antenna: included Channel: single way 5.8G input, 4 frenquency ranges 32 channel optional. Battery: 500mA lithium battery, charging time 90m usage time about 100m. Power loss: 320 mA 3.7V (Max) Working enviroment: -10~+65 C Degree Antenna: Built-in 3dbi brass 5.8G antenna Power button: boot or shutdown CH button: Long Press to adjust frequency ABEF ; Short Press to adjust frequency 12345678 Battery: Built-in 500mA lithium battery Charge indicator: red light when charging, red light off when the battery is fully charged Channel indicator: indicates the current receiving frequency, such as: E1, corresponding to the red lights of E and 1 will on. Charging port: micro USB + 5V (use only rechargeable) Charging current: 500mA Charging time about 90 minutes Time about 100 minutes |
FPV Goggles (Optional) |
Built-in 3.7V 1200mAh Battery Support a key search frequency RaceBand 40 channel Auto-Searching Real-time video return 5.8G FPV Receiver ● Small size and light weight; ● Low power consumption, Working current 300~330mA; ● Double antenna reception to make the signal more stable; ● RaceBand 40 channel, Auto-Searching; ● 3.0 Inch 480*320 dot high brightness LCD screen; ● Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand; ● Built-in 3.7V/1200mAh high-capacity Li-ion polymer Battery; ● Universal USB charging interface; ● Real-time video return, Very low time-delay; ● Bilingual menu in support of Chinese and English; ● Support external video signal input; ● Support AV signal output (Connect external DVR); |
Flysky Remote Controller (Optional) |
Item Name: FS-i6 transmitter Channel: 6 Model Type: fixed wing/helicopter/glider Channel resolution: 1024 steps Low voltage warning: less than 4.2v ANT length: 26 x 2mm( dual antenna) Weight: 392g Battery: 6v 1.5AA x 4(not included)e Size: 174 x 89 x 190 mm Color: black Certificate: CE ,FCC |
Racing Training Parts |
250mm Packing Apron, it suitable for take-off and landing 500mm Arch Racing Air Gate for Practicing Outdoor Tiny FPV Drone Racing |
Features:
New Crazybee F4 PRO Flight controller 1-2s Lipo Compatible
2S whoop more powerful and more flight time
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
0802 Powerful and High efficiency Brushless motor and Smooth ESC.
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DS MX version no RSSI output)
Caddx EOS2 camera ready , More comfortable FPV experience
Camera Angle adjustable (0-35°)
VTX power switchable 25mw-200mw
Smart Audio ready , change VTX bands, powers, channels via OSD
Adjust the settings and the PID of the flight controller via OSD
Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
Full telemetry function ready (Frsky Non-EU and Flysky version support)
Support buzzer
Real Bind and Fly version
Compatible both for 1s-2s
Include Racing Training Packing Apron and Arch Racing Air Gate
Include FPV Watch or Goggles, Nice Experience to the first aerial view
Package Included:
Frsky BNF FPV Watch Version
1 x 75mm V2 Brushless whoop Frame (White and Black Frame Optional)
1 x 2" TFT LCD 5.8G 32CH FPV Watch
1 x Mobula7 Angle adjustable Canopy V2
1 x Crazybee F4 PRO F C built-in receiver built-in Frsky NON-EU receiver
4 x KV16000 Motor (2cw + 2ccw)
1 x 40mm propeller Red Colors (4cw+4ccw)
1 x Extra 10Pairs Propellers for Black Frame Kit as gift
1 x Caddx EOS2 camera
1 x 5.8G 40ch 25mw-200mw VTX
4 x 3.8v 300mah 40C/80C battery
1 x 1S06 6 Way Lipo/LIHV charger
1 x Fixing Mount for Lipo Battery
1 x 250mm Packing Apron
1 x 500mm Arch Racing Air Gate
SKYPE: +8615012643826
Email:yxy@xt-xinte.com
No related record found