Skydroid UVC Single /Dual Antenna Control Receiver OTG 150CH 5.8G Full Channel FPV Receiver W/Audio for Android Smart Phone PC M Item NO.: 9876

New
functions of UVC receiver: 150 frequency point + automatic frequency sweep
frequency + spectrum analyzer graphical interface + snowflake display + addition
and subtraction frequency - more simple and beautiful
appearance

1.
Product Description

The
5.8g receiver, traditionally transferred to the screen, is passed to the phone
and can be passed to the screen at the same time. . Powered by mobile phone,
simplify wiring and structure! ! Plus "FUAV" this app, reflecting vr flight! !
!

2.
Product characteristics

I
believe that everyone has been entangled in the problem of digital image
transmission simulation, then our product will tell a lot of people, it turns
out that our simulation picture has just begun!

The
original 150-frequency full-band 1500 scans calculate rssi intensity, locking
the most accurate frequency! The frequency of the traditional 32 40 channel
transmitter often drifts 5m to 10m, the traditional 32-channel receiver, that
is, the accuracy is only 10m, and the distance within 10m can be up to 5
times.

We
have increased the channel to 150, the accuracy is 2m, 2m can basically lock the
signal point of 95%, which is also the high precision of the chip. . The
individual gap can be controlled at 10 percent. With high precision, how can the
abstract radio be presented to everyone, so we made 2 months and put an osd
waveform without increasing power consumption and cost. Do it inside the image
interface! ! This thing is the mobile spectrum analyzer, you can detect the
quality of the antenna, the transmitter to do horizontal comparison, the
electromagnetic environment detection of the flying factory, the plane to find
the plane, and so on.

3.
Product features and features

1.150CH 5.8Ghz analog signal, 1500
scans cover all bands.

2.Resolution 640*480
30fps.

3.Can display frequency spectrum,
to check the signal strength of antenna or transmitter.

4.Support dual display on
smartphone, can be used as VR goggles.

5.Please calibrate it in open
area, and keep away from transmitter more than 30m. Long press the menu button
and power on receiver, enter into calibration mode.

4.
Product use and software installation How to use:

To ensure the
best results, please calibrate the highest and lowest signal before
use.

For calibration,
please take it outside the open space and pull the transmitter away for more
than 30 meters to calibrate. Press and hold the function button to power the
receiver into calibration mode.

5.8G 150
frequency point map receiver, receiving images support 3 ways to
display:

1.OTG is
connected to Android phone or tablet (This product does not support Apple
phone)

2.USB cable to
connect PC

3.AV connected
display

How
to use the phone:

1.Android phone
installation APP Download address

Search for "FUAV"
in the millet application market, or click on the link below to download the
Android phone app.

Http://www.fuav.xin/download/skydroidfpv.apk

2. Plus official
exchange group: 318480806, communication related technology

Connect directly
to the receiver with OTG cable (no external power supply required)

3. After the
airborne image transmission device is powered on, press and hold the function
key for 3 seconds on the image transmission to automatically search for the
frequency point and automatically lock the signal zui strong frequency
point.

4. Use video
links

1. How to detect
whether the phone supports usv, video link:

http://v.youku.com/v_show/id_XMTc1MDEwMDc4NA==.html

2. Instructions
for use:

Https://v.qq.com/x/page/u0528zyzpyj.html

3. Computer use
video tutorial:

http://v.youku.com/v_show/id_XMTc1MDA1Nzg1Ng==.html

How
to use the PC display:

1.
Connect the PC with a USB cable

2. (XP) Open the
camera (WIN7) to install the AMCP camera software, (WIN10) to turn on the
camera. Or MP ground station.

3. After the
airborne picture transmission device is powered on, press and hold the function
button for 3 seconds on the picture to automatically search for the frequency
point and automatically lock the signal with the strongest frequency
point.

How to use the AV
display:

1, 4p line (need
to DIY) to connect by themselves, define the corresponding display AV interface,
the receiver 5V power supply.

2. After the
airborne image transmission device is powered on, press and hold the function
button for 3 seconds on the image transmission to automatically search the
frequency point and automatically lock the signal zui strong frequency
point.

5.
Receiver sweeping skills Focus Focus! ! !

Recently, some netizens have
responded that the video is flickering and the distance is relatively close.
Later, the outdoor test found that the problem is that the frequency sweeping
accuracy is relatively high, and the indoor transmitting signal is reflected by
the wall, resulting in the actual detected channel value being too high.
Remember to follow the operation manual, and take the outdoor space and the
transmitter. Sweep the frequency over 30 meters or more. Remember not to use the
indoor frequency. .

6.
Performance parameters:

Use
environment: empty, no occlusion, no interference

Frequency range:
5645MHz~5945MHz

Resolution: 640*480
30fps

Working current: USB 5V
190mA

Suitable temperature range:
-10~65°C

Double screen display on mobile
phone, put vr glasses, experience first person perspective
flight

Note:

1. The display resolution on the mobile phone is
640*480. Please note that the 5.8G analog signal transmission is not a
high-definition digital signal. Please do not purchase if the picture quality is
too high.

2. At present, most of the Qualcomm cpu phones can
be tested. The MediaTek (MTK) cpu does not support except for some high-end
models. Most models of Huawei mobile phones and Meizu mobile phones use
MediaTek's cpu, so many models do not support this device before
2017.

3. Some models such as oppo and BBK need to open
the otg function in the settings to connect properly.

4. iphone does not support this
receiver.

Note:Single Control Receiver use
way as the same as the Dual Antenna Control Receiver