|
| Quantity | 0-3 | 4-50 | 51-100 |
| Discount | 0% OFF | 5% OFF | 10% OFF |
| Price | US$ 150.89 | US$ 143.34 | US$ 135.80 |
Copy and share this link on social network or send it to your friends
Copy| Product Name | SKYRC D400 Ultimate Duo 400W AC/DC Balance Charger Discharger |
| Item NO. | F22175 |
| Weight | 3.553 kg = 7.8330 lb = 125.3284 oz |
| Category | DIY RC Drone Accessories |
| Brand | SKYRC |
| Creation Time | 2017-09-03 |
SKYRC D400 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously. It also supports power distribution in AC/DC mode to get max charging power to shorten charging time.
Moreover, it is not only just a charger, but also can supply 150 Watts DC Power on channel 2, users can use it to power DC devices.
What’s more, the synchronization mode is available, in which users could perform synchronous settings for charging same batteries simultaneously to offer time-saving benefits.
Win-channel Charger
SKYRC D400 allows you to plug 2 batteries into one charger
simultaneously, and it will intelligently and automatically charge 2
battries at once to their maximum capacity. To top of it, the batteries
being charged do not even need to have the same configuration. You can
connect different chemistry(NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb)batteries
into any of the charging ports.
Dual Input and Power Distribution
It supports power distribution, for example, Channel 1-300W, then
Channel 2-100W, the total power is 400W. Please note the Max power for
Channel 2 is 200W, but Channel 1can reach to 400W.
Optimized Operating Software
SKYRC D400 features the so-called AUTO function that set the feeding
current during the process of charging or discharging. Especially
for lithium batteries, it can prevent the overcharging which may lead
to an explosion due to the user's fault. It can disconnect the circuit
automatically and alarm once detecting any malfunction. All the programs
of this product were controlled through two way linkage and
communication, to achieve the maximum safety and minimize the trouble.
All the settings can be configured by users!
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles for
each channel. You can keep the data pertaining to program setting of the
battery of continuous charging or discharging. Users can call out
these data at any time without any special program
setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
PC Control Software “Charge Master”
The free “Charge Master” software gives you unparalleled ability to
operate the charger through the computer. You can monitor pack voltage,
cell voltage and other data during the charging, view charge date in
real-time graphs. And you can initiate, control charging and update
firmware from “Charge Master”.
With “Charger Master” and one computer, you could operate and update two channels simultaneously.
Internal Independent Lithium Battery Balancer
SKYRC D400 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.
Balancing Individual Cells Battery Discharging
During the process of discharging, SKYRC D400 can monitor and balance
each cell of the battery individually. Error message will be indicated
and the process will be ended automatically if the voltage of any single
one cell is abnormal.
Adaptable to Various Type of Lithium Battery
SKYRC D400 is adaptable to various types of lithium batteries, such as LiPo, LiIon and the new LiFe series of batteries.
LiHV Mode Available
The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage 4.35 V.
Fast and Storage Mode of Lithium Battery
Purposes to charge lithium battery varies, 'fast' charge reduce the
duration of charging, whereas 'store' state can control the final
voltage of your battery, so as to store for a long time and protect
useful time of the battery.
Re-Peak Mode of NiMH/NiCd Battery
In re-peak charge mode, the charger can peak charge the battery once,
twice or three times in a row automatically. This is good for making
certain the battery is fully charged.
Delta-peak Sensitivity for NiMH/NiCd
Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge
termination program based on the principle of the Delta-peak voltage
detection. When the battery's voltage exceeds the threshold, the process
will be terminated automatically.
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge > discharge or
discharge > charge is operable for battery refreshing and balancing
to stimulate the battery's activity.
Weight 2510g
Input Voltage AC 100-240V/DC 11-18V
Charge Circuit Power 400W
Discharge Circuit Power 36W
Charger Current Range 0.1-20A
Discharge Circuit Power 0.1-5A
Current Drian for Balancing Port Max 500mA/cell
Trickle Charging Current 50mA-300mA & OFF
DC Power Supply Output 6-15V/Max.10A
LiPo/LiFe/Lilon/LiHV Battery Cell Count 1-7S
NiMH/NiCd Battery Cell Count 1-18S
Pb Battery Voltage 2-24V
1x SKYRC D400 charger
Email：yxy@xt-xinte.com
Wechat:15012645226
2019-05-12