OEM D2212 920KV Brushless Motor 30A ESC Propeller GPS APM2.8 Brushless Camera Gimbal for MultiCopter Hexacopter UFO Heli

Copy and share this link on social network or send it to your friends

Copy

OEM D2212 920KV Brushless Motor 30A ESC Propeller GPS APM2.8 Brushless Camera Gimbal for MultiCopter Hexacopter UFO Heli Item NO.: F14711-H

Write a Review
US$ 157.76 (5% Off)
US$ 166.07 Save US$ 8.30
Remark:
Customized Requirements
Quantity:
Shipping Cost:
Estimate Shipping Cost

Product Name OEM D2212 920KV Brushless Motor 30A ESC Propeller GPS APM2.8 Brushless Camera Gimbal for MultiCopter Hexacopter UFO Heli
Item NO. F14711-H
Weight 1.65 kg = 3.6376 lb = 58.2020 oz
Category DIY RC Drone Accessories > DIY RC Drone Kit
Tag
Brand Feichao
Creation Time 2017-07-25

OEM D2212 920KV  Brushless Motor 30A ESC Propeller CNC 2-Axis Brushless Camera Gimbal for MultiCopter Hexacopter UFO Heli

Motor Description:

Outer diameter: 28.0 mm
Height: 24.0 mm (Without Shaft)
K V: 920kv
Fit for DJI Phantom F330 F450 F550 X525
 
ESC:
This ESC is specially designed for multi-copter application, support up to 6S Lipo.
 
This Version Without Motor Wires, Connectors are Welded Directly To The PCB Board.
 
Specifications:
 
30A-Pro 2-6S Electric Speed Controller (ESC) OPTO - Specially for Multi-rotor Aircraft.
 
Output: Continuous 30A, burst 45A up to 10 seconds.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NiMH battery.
BEC: NO
Parameter programming function: Yes
Size: 56.5mm (L) * 25.6mm (W) * 8mm (H).
 
Multifunction Power Distribution Board 5.3V BEC:
Specifications:
Dimension: 55 * 55mm
Install pitch: 45 * 45mm
Output line: 6 way
Voltage input: 2S-6S
Voltage sampling: 10/1
BEC output: 5.3V (Avoid flight control's problem of insufficient voltage)
4~6S battery powered Support 2 group 12V output for Data Transmission and Camera Gimbal PTZ (12V output only support 4~6S,3S is not supported)
 
Note: It is DIY kets, recommend to use 100w iron to welding.
 
6M GPS with Compass L5883 25cm Cable:
GPS Features:
- Built-in compass GPS module
- Main chip: 6M
- With fast satellite searching speed and high precision
- Compatible with APM serial port and I2C port
- Includes round plastic shell
- Pre-configured, Flashed with the correct settings, and tested
- Super Bright LED,BlackPlane with Standard Mk style mounting holes 45mm X 45mm
- Cable included
- With L5883 compass Cable length in 25CM
- Dimensions: 53.5*53.5*15.5
- Weight: 30g
 
APM2.8 APM 2.8 Multicopter Flight Controller 2.5 2.6 Upgraded Built-in Compass:
- Arduino Compatible!
- Can be ordered with top entry pins for attaching connectors vertically, or as side entry pins to slide your connectors in to either end horizontally
- Includes 3-axis gyro, accelerometer and magnetometer, along with a high-performance barometer
- Onboard 4 MegaByte Dataflash chip for automatic datalogging
- Optional off-board GPS, uBlox LEA-6H module with Compass.
- One of the first open source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
- Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively.
 
CNC 2-Axis Brushless Camera Stable Gimbal:
Brushless motor direct drive
 
with 2pcs 2208 motors and BGC 2.0 gimbal controller,sensor The BGC 2.0 controller is more better than V3 controller,it's more stable.
 

No related record found

You May Also Like