PCIE 3.0 x16 to x1 Ribbon Riser Card Cable Graphics Extension Cable For Mining
Product advantages:
1. Advantages of wire, using German patented wire, using high-quality PCIe connectors, high-frequency support PCIe 3.0 8G/bps stable transmission. The BIOS does not need to set down the speed, the wire core wire contains the power supply, and the excavation type motherboard extension cable does not require an external power supply and the video card is directly used.
2. The advantage of line length can be customized from 2cm to 2m. The switch cable sold by the shop has low wire resistance and the line length within 60cm can stably support PCIe3.0 full speed.
3. The differential signal has no via design and there is no signal attenuation and interference problem of parasitic capacitances and parasitic inductances. There will be no micro-short circuit in the CAF. The PCB uses high-frequency, low-resistance, high-quality materials. PCB workmanship is precise. The PCB uses high-TG plates. The thickness of the material is thickened to 1 oz, the gold finger gold plating content is sufficient, and the gold plating foot has good electrical conductivity, which can reduce the blue screen problem caused by the increase of the oxidative rust resistance. Thick copper thickness can increase the power supply capacity to 36W. The product is durable.
4. High-quality connectors are used. The connector opening design allows x4 x8 x16 board graphics cards to be inserted in addition to the x1. The hardware compatibility of the board is strong. The product is simple and easy to use, 100% power delivery test. Failure rate is less than 5 parts per 1,000
5. PCB dwarf and fat design, dwarf will not be stuck to the graphics card, plus fat and lengthened design to make the card easier to install, low probability of damage.
Products real shot
R11SF-WK (welding power cord)
R11SF-WP (no power cord)
ADT mining products have different models depending on the shape
No related record found