Copy and share this link on social network or send it to your friends
Copy| Product Name | Low Power Fingerprint Identification Module Push Finger Detection/Capacitive Touch Semiconductor Fingerprint Sensor ZW20/ZW3020 |
| Item NO. | F54301-D1F54301-D2F54302-D1F54302-D2 |
| Weight | 0.03 kg = 0.0661 lb = 1.0582 oz |
| Category | Consumer Electronics |
| Creation Time | 2025-06-16 |
ZW20:
Product Description
ZW20 is a low-power capacitive fingerprint identification module,
which consists of an active semiconductor fingerprint acquisition SENSOR
It is composed of active semiconductor fingerprint acquisition SENSOR and
fingerprint identification processing chip.
Adopting LGA package, it supports 360° arbitrary direction recognition
with 508DPI resolution.
High signal-to-noise ratio, low power consumption, fast response,
ultra-low rejection rate and false recognition rate, can be applied to smart door locks,
safes, POS machines and identity authentication systems.
Product Parameters
Module size: φ21mm
Recording times: 3~8 times
Resolution: 108×108pixel
Resolution: 508DPI
Interface protocol: TTL serial port
Communication Baud Rate: Default Baud Rate 57600bps/1 Start Bit/1 Stop Bit 3.3VTTL level
Interface and wire sequence: 1.0mm × 6Pin horizontal paste
Fingerprint library capacity: 100
Storage temperature and humidity: -40℃~+125℃; 45%~95%RH
Operating temperature and humidity: -40℃~+85℃; 45%~85%RH
False recognition rate: <0.001%
Rejection rate：<=5%
Comparison mode: 1:N
Standby current(sensor)~luA
Operating current (algorithm MCU): ~14mA
ESD level: non-contact discharge ~15KV / contact discharge ~8KV
Email：yxy@xt-xinte.com
Wechat:15012645226
Microsoft teams: 13640955802
No related record found