JMT OctopusX1 127mm FPV Racing Drone RTF with MiniF4 Flight Controller 20A 4 in 1 ESC FS I6 Transmitter 450mAh Battery LST-009 FPV Goggles Flysky Version

Copy and share this link on social network or send it to your friends

Copy

JMT OctopusX1 127mm FPV Racing Drone RTF with MiniF4 Flight Controller 20A 4 in 1 ESC FS I6 Transmitter 450mAh Battery LST-009 FPV Goggles Flysky Version Item NO: F37688-G

US$ 167.24 (6% Off)
US$ 177.91 Save US$ 10.67
Quantity:
Shipping Cost:
Estimate Shipping Cost

Product Name JMT OctopusX1 127mm FPV Racing Drone RTF with MiniF4 Flight Controller 20A 4 in 1 ESC FS I6 Transmitter 450mAh Battery LST-009 FPV Goggles Flysky Version
Item NO F37688-G
Weight 3 kg = 6.6139 lb = 105.8219 oz
Category RC Toy Drone > JMT
Brand JMT
Creation time 2020-05-14

JMT OctopusX1 127mm FPV Racing Drone RTF with MiniF4 Flight Controller 20A 4 in 1 ESC FS I6 Transmitter 450mAh Battery LST-009 FPV Goggles Flysky Version

FLYSKY version compatible with FS-i6 AFHDS-2A remote control
All accessories are welded and assembled and tested before shipping.

Package include
1x OctopusX1 127mm Carbon Fiber Frame Kit
1x 3D Print PLA Camera Mount
4x 3018 PC-3inch Propellers (4Pairs)
4x XT1105-5000KV Motors
1x 20A 4 IN 1 ESC
1x MiniF4 Flight Controller
1x FSD-252VTX 
1x Nano 2 NTSC FPV Camera
1x Battery tie
1x XT30 power filter
1x FS-RX2A Pro Receiver
1x FS I6 Transmitter 
2x Transmitter Rocker Mount (Red)
1x 450mAh 7.4V 2S 80C Lipo Battery
1x IMAXRC B3 pro Charger
1x LST-009 FPV Goggles

Flight control
Input voltage: 2-4 S Lipo
Built-in OSD Betaflight
-com output 5V @ 2A BEC
Without black box
-Support BLHeliSuit configuration
-Also supports Cleanflight and INAC firmware for falsh
-Support PPM, SBUS (RX1), IBUS (RX6), ds m2 (RX6) receiver
Firmware: BetaFlight 3.20 SD

Paddle
Size: 3018
Color: transparent gray
Material: PC
Weight: 0.8g

Motor
Weight: 6.2g
Motor installation size: M2Φ9
Shaft diameter: Φ1.5
Maximum lithium battery: 3S
Recommended support: 2-3 inches

ESC
Product name: 15A Blheli_S BB2 4 in 1 ESC
Maximum current: 20A / 30A (5S)
BEC: No
Input voltage: 2-4S
Weight: 4.8g
Size: 27x31mm (PCB)
Mounting hole: 20x20mm
-D-shot 600 default
-Support D-shot 150, D-shot 300, Oneshot125 and Multishot

Camera    
Image sensor: 1/3 "CMOS
Horizontal resolution: 700TVL
Lens: 2.1mm (M8) FOV 155 °
Signal system: NTSC
Day / Night: Color
Power supply: DC 3-5.5V
Net weight: 3.2g
Size: 14x14x16mm (LxWxH)

VTX
1.40 channel
2. Support touch switch and PWM / touch switch selection
Channel); support touch switch to select frequency group
3. Support 25mW / 200mW selection, five LED high power display
4. LED display channel and status information
5. With OSD input and output interface
6. Directional rod antenna;
7. Working voltage (power input): 5V working current: 25mw-300ma, 200mw-500ma

8. Small and light design: peripheral size 27 * 27mm, weight 4g        


No related record found