Home>Consumer Electronics>Computer Accessories>JMT Mini-Pcie Wireless Network Card to Pcie 4.0 x1/ x4/ x16 Riser Extension Cable PCIe 4.0 mPCIe M.2 NVME SSD Motherboard Riser Ribbon Extender

JMT Mini-Pcie Wireless Network Card to Pcie 4.0 x1/ x4/ x16 Riser Extension Cable PCIe 4.0 mPCIe M.2 NVME SSD Motherboard Riser Ribbon Extender Item NO.: F46433-B1/2 F46434-B1/ F46435-B1/2

Sold (1)

US$ 17.99

Color: 15cm 25cm

Version: pcie4.0 x1 R61JF pcie4.0 x16 R63JC

Quantity: Stock ( 39999996 )

Estimate Shipping Cost

Product Name	JMT Mini-Pcie Wireless Network Card to Pcie 4.0 x1/ x4/ x16 Riser Extension Cable PCIe 4.0 mPCIe M.2 NVME SSD Motherboard Riser Ribbon Extender
Item NO.	F46433-B1/2 F46434-B1/ F46435-B1/2
Weight	0.1 kg = 0.2205 lb = 3.5274 oz
Category	Consumer Electronics > Computer Accessories
Brand	JMT
Creation Time	2022-02-23

Wire advantage. Using german patented imported wire, using taiwan imported connector, supporting pcie 3.0 full-speed stable transfer.From 3 cm to 1 meter can be customized.The cable impedance is low, and the cable length within 60 cm supports pcie3.0 full speed.
Differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there will be no caf micro short circuit phenomenon, and the product is durable.
The PCB is made of precision, the thickness of the copper material is thickened to 1oz, the gold plated content is sufficient, and the gold plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increase of oxidation and rust resistance. Stable at full speed, no speed reduction required, and no compatibility issues.
The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm at the metal welding points, and lock the screws and hexagonal nuts to fasten it. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.
The PCB is designed with short and fattening, which will not get stuck on the graphics card. The fattening and long design makes the board easier to install and reduces the chance of damage.
Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.

Product Description
Details:
Product model: R61JF 4.0/ R62JF 4.0/R63JC 4.0
Product name: Mini PCIe to PCIE4.0 adapter board extension cable
Wire length: 3-100cm (support wire length customization)
Speed bandwidth: PCIe3.0/4.0x1
Product function: M.2 NVME SSD is connected to the Mini-PCIe interface of the motherboard through an extension cable

Purchase restriction: only designated by professional engineers for purchase, improper assembly or improper operation will burn your device,general purpose is not suitable and cannot be used, ordinary buyers do not purchase.

Procurement Tips: Be sure to buy 1~2 samples first, and then buy them in bulk after testing and verifying that they are correct.

Length description:The length of the wire refers to the part of the wire, excluding PCB and connector's Lengths.

Q&A:
1)What is the quality of the wire? Is there a shield?

EMI shielding conductive polymer is used, new materials are used for EMI shielding, flat cable design. This technology allows each cable to be completely covered by the electromagnetic interference shield of the conductive polymer to prevent the incident or outgoing emission of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the spreader.