JMT DIY BNF RTF 145mm RC FPV Racing Drone Quadcopter F405 OSD 2-3S 1306 3100KV Motor 2.4G T-Lite TX 1200TVL HD Camera Goggles Item NO.: F44180-A B C D E F G H I J

JMT DIY BNF RTF Combo Set J145 145mm Wheelbase RC FPV Racing Drone Quadcopter F405 OSD 2-3S 1306 3100KV Motor 2.4G T-Lite / Fs-i6 Transmitter 1200TVL HD Camera Goggles

Features

Built-in OSD Betaflight

Support BLHeliSuit configuration

Support voltage 2-3S

Flyting time: about 8-10mins

Controll Distance: with FS-i6 transmitter about 300meters, with Jumper T-Lite transmitter about 2000meters

4IN1 20A 2-4S BLHeli_32 Brushless ESC

Current: 20A

Maximum current: 30A

BEC: No

Battery: 2-4S

Weight: 4.8 grams

Size: 27x31mm (PCB)

Mounting hole: 20x20mm

Support D-shot 150, D-shot 300, Oneshot 125 and Multishot

VT5804 MINI X 5.8G Support OSD VTX

Input voltage: 6-26V

Output voltage: 5V

Frequency: 5.8G

Frequency point: 16 points

Output power: 6-speed adjustable (0mW / 25mW / 50mW / 100mW / 200mW / 400mW)

Size: 24 * 24 * 3mm

Installation hole distance: 20 * 20mm

Weight: 2.2g

1306 3100KV CW CCW Brushless Motor

Size: 1306

KV: 3100

Stator diameter: 18mm

Stator length: 14.1mm

Shaft diameter: M4

Size: (diameter * length): Φ18×15.1mm

Motor weight (g): 13g

Power (lithium battery): 2-3S

Recommended ESC: OPTO mini 12A / 16A / 20A

Maximum current (A): 7.6A

Maximum power (Watts): 61W

3052 Gemfan Propellers

Product name: 3052

Weight: 1.65g

Material: PC

Inner diameter: 5mm

Hub thickness: 6mm blade

Width: 11.1mm paddle

Size: 11mm

F405 Flight Controller

model: F405

Size: 31 * 30 * 8mm

Installation hole distance: 20 * 20MM, φ4mm

Weight: 6g

Package weight: 20g

1200TVL 2.1mm Lens FPV Camera

Image sensor: 1/3" COMS

Horizontal resolution: 1200TVL

Lens: 2.1 mm

Signal system: PAL / NTSC

Signal to noise ratio:> 60dB (AGC off)

Electronic shutter speed: PAL: 1/50~100,000; NTSC: 1/60~100,000

Net weight: 5.0 grams

Voltage: 5-40V

Dimensions: 19 mm * 19 mm * 19 mm

Receiver:Frsky Rceiver , or Flysky Receiver ,or Without Receiver( Optional)

Specification:

Model
Name	Mini FPV Goggles
LCD Screen	Screen size:    3.0 Inch
	Resolution:    480*320
	Display Ratio:  16:9
	View Angle:    6 o'clock
	Brightness:    350cd/m⊃2; with high brightness backlight LED
Video delay	Video time-delay less than 20ms
Lens	4X Fresnel Lens, 92% transparent rate no distort of light
Interface	Antenna	2 X RP-SMA male
	USB	To charge the battery
	AV Jack	External video signals input or internals AV signal output
Languages	English and Chinese
Power Supply	Power adapter:  DC5V/1A (USB interface)
	Battery: 3.7V/1200mAh,Each full charge revive around 2.5hr working time
	Power Consumption: *The device operating current of 300~330mA at 3.7~4.2V; *Built-in battery maximum charge current of 500mA;
Wireless	Frequency Table(MHz)
		CH1	CH2	CH3	CH4	CH5	CH6	CH7	CH8
	Band A	5865	5845	5825	5805	5785	5765	5745	5725
	Band B	5733	5752	5771	5790	5809	5828	5847	5866
	Band E	5705	5685	5665	5645	5885	5905	5925	5945
	Band F	5740	5760	5780	5800	5820	5840	5860	5880
	Band R	5658	5695	5732	5769	5806	5843	5880	5917
Body	Dimension:  13.5cm * 13.2cm * 6.5cm
	Weight:     180g(with headband, not included antennas)

Controls Diagram:

Transmitter Specfications:
Channels: 6
Model type: fixed-wing/glider/helicopter
RF range: 2.405-2.475GHz
Bandwidth: 500KHz
Band: 142
RF power: less than 20dBm
2.4G system: AFHDS 2A and AFHDS
Code type: GFSK
Sensitivity: 1024
Low voltage warning: less than 4.2V
DSC port: PS2; output: PPM
Charger port: no
ANT length: 26mm * 2(dual antenna)
Power: 6V 1.5AA * 4 (Not included)
Display mode: Transflective STN positive type,
128 * 64 dot matrix VA72 * 39mm, white backlight.
Size:174 * 89 * 190mm
Weight: 392g
Online update: yes
Color: black

Receiver Specifications:
Channels: 6 Channels
Model type: Airplane / Glider / Helicopter
Frequency range: 2.4--2.48GHZ
Band width number: 140
Transmitting power: not moer than 20dBm
RX sensitivity: -105dBm
2.4G system: AFHDS 2A
Code type: GFSK
Antenna length: 26mm
Input power: 4.0-6.5V DC
Dimension: 40 * 21 * 7mm
Weight: 6.4g
Color: Black
i-Bus interface: No
Data acquisition interface: No

Package information:
Package size: 23 * 21 * 10.5cm / 9.1 * 8.3 * 4.1in
Package weight: 680g / 1.5lb

Mode2=Left hand throttle 

Mode1=Right hand throttle

Jumper T-Lite 16CH Hall Sensor Gimbals JP4IN1 Multi-protocol RF System OpenTX Mode2 Transmitter Support Jumper 915 R900/CRSF Nano for RC Drone

Description: 

Brand Name: Jumper

Item Name: T-Lite

Size:166*106*56mm

Weight: 260g (with 18650)

Voltage: DC3 5-4. 2V

Battery: 1x18650(Battery not included)

Channel: 16ch

External Micro SD Card: resered SD card slot

Features:

STM32F205 MCU

Opentx firmware

Screen:1.3''12864

High quality hall sensor gimbals

Internal Multi-protocol moduleI

Support Jumper 915 module (sell seperately) compatiable with Jumper R900 series receivers, Frsky R9 series receivers,full speed TBS NANO Crossfire supported

Built in USB-C charging

Voice and Vibration function

Wheelbase: 145mm

Weight: 45g

Colour: Black

Arm thickness: 3mm

The remaining board thickness: 1.5mm

Fixed camera size: 19mm

Motor installation size: 9mm-12mm

Flight control installation size: 20*20mm

Precautions

1 Do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to fail to charge and become useless). After the battery is fully charged, it cannot be charged for a long time.

2. Do not modify any parameters and wiring without knowing the flight control and remote control.

3. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then turn off the remote control to prevent accidents.

4. The product is unassembled/welded in loose parts. If you have any technical and assembly questions, please feel free to contact us. We have a dedicated technical team to reply to related questions. If the customer needs to assemble, please feel free to contact us, we will give a reasonable quotation for the additional logistics freight and technical assembly fee.

5. This product is not a toy and is not suitable for children under 14 years of age.

6. If you are a beginner, it is recommended to be assisted by an experienced adult

7. Novices should pay attention not to take the airplane by hand when the airplane is turning or let children take it to prevent it from being scratched.

8. Please turn off the start switch in time when the aircraft falls from a high altitude to a wall or hits other objects during flight, otherwise it may cause damage to the flight control motor, etc. Check whether the aircraft is damaged or the screws are loose, etc. before taking off again when everything is normal.

Please refer to our pictures to choose the desired combination, all parts are sold separately in our shop, and you can add them as spares. If you have any questions, please feel free to contact us.