Home>RC Toy Drone>Happymodel>Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone RTF 25mW VTX 700TVL Camera T8S Remote Controller
Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone RTF 25mW VTX 700TVL Camera T8S Remote Controller

Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone RTF 25mW VTX 700TVL Camera T8S Remote Controller Item NO.: F31668-L

Write a Review
US$ 114.45
US$ 124.40 Save US$ 9.95 (8% Off)
Quantity

Copy and share this link on social network or send it to your friends

Copy
  • Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone RTF 25mW VTX 700TVL Camera T8S Remote Controller
Product Name Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone RTF 25mW VTX 700TVL Camera T8S Remote Controller
Item NO. F31668-L
Weight 0.9 kg = 1.9842 lb = 31.7466 oz
Category RC Toy Drone > Happymodel
Brand Happymodel
Creation Time 2019-10-16

Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone RTF 25mW VTX 700TVL Camera T8S Remote Controller

NOTE:for easier transport,this product do not include battery

Specifications:
Brand Name: Happymodel
Item Name: Sailfly-X 2-3S Micro FPV racing drone
Wheelbase: 105mm
Size: 95mm*95mm*50mm(without propellers)
Weight: 38g(without battery)
Weight:63g(with Original 3s 300mah Lipo battery )

Features:
Crazybee F4 PRO V2.1 AIO Flight controller 2-3s Lipo Compatible
The lightest 1102 brushless motor only 2.8g with double ball bearings
Light ,Powerful and smoothly
AIO 5.8g 40ch 25mw vtx / 700tvl camera with smartaudio
2mm carbon fiber frame with TPU 3d-printed canopy
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
Frsky version support both NON-EU and EU-LBT Frsky transmitter(EU-LBT need to update firmware to Betaflight 4.0( release date :2019-4-11)
Flysky version support both AFHDS and AFHDS-2A protocol transmitter
DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..
Full telemetry function ready (Frsky and Flysky version support)
Real Bind and Fly version
Compatible both for 2s-3s Lipo/LIHV

Package includes:
1xItem Name QtySailfly-X frame
1x30 degree angle canopy(red 3d print tpu)
1x40 degree angle canopy(purple 3d print tpu)
1xRadiolink T8S Remote Controller
 
 
Option4: Crazybee F4 V2.1 PRO FC no RX verion
4xEX1102 KV8500 Motor 1.5mm shaft
1x65mm propeller(6cw+6ccw)
1xHCF7P 25mw VTX/700tvl camera AIO
1x3S 11.4v 300mah 30C/60C battery
1xPropeller disassemble tool
1xScrewdriver
 

Spare parts specifications:

Motor Mode: EX1102 KV8500
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):2S-3S

Flight controller
(Frsky version) CRAZYBEE F4FR PRO V2.1 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V2.1 Firmware target: CrazybeeF4FS
(DSM2/DSMX version) CRAZYBEE F4DX PRO V2.1 Firmware target: CrazybeeF4DX
(No RX version) CRAZYBEE F4 PRO V2.1 Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM
Power supply: 2-3S battery input (DC 7.4-13V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter
Built-in voltage detection
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 2-3S LiPo/LiPo HV (7.4v/13v)
Current: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600

Frsky receiver Version SPI BUS receiver
Frsky D8/D16 switchable
Compatible both Non EU and EU-LBT transmitter Channels: 8ch or 16ch
EU-LBT support(need to update betaflght v4.0 date 2019-04-11)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Flysky receiver Version SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support
DSM2/DSMX receiver version
Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

PNP No RX version
No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc.
AIO Camera&VTX
(HCF7P)

Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Camera resolution: 700TVL
Field of view: 120°
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smartaudio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9″12.0mm ( L*W )
Weight: 3.2g

Lipo Battery Capacity:300mAh
Voltage:11.4v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 65mmx18mmx11mm
Weight: 25g

Connector: XT30



No related record found