|
| Quantity | 0-3 | 4-50 | 51-100 |
| Discount | 0% OFF | 5% OFF | 10% OFF |
| Price | US$ 23.65 | US$ 22.47 | US$ 21.29 |
Copy and share this link on social network or send it to your friends
Copy| Product Name | For M.2 NVME to PCI-E X4 Signal Extension Cable PCIe 4.0x4 gen4 Adapter Cable for M2 NVMe SSDs with SATA Power Cable 64G/bps |
| Item NO. | F53271-B1 F53271-B2 |
| Weight | 2024 kg = 4462.1562 lb = 71394.4990 oz |
| Volume | 1 CBM |
| Category | Computer Accessories |
| Creation Time | 2024-11-20 |
Model No: K42 Series;
Product Name: M.2 NVME to PCI-E X4 Signal Extension Cable
Cable length: 15cm,25cm (support cable length customisation)
Speed bandwidth: PCIe 4.0x4 gen4 64G/bps
Purchase Restrictions:
Designated for purchase by professional engineers only, not suitable for general use.
Purchase Tips:
Be sure to buy 1~2 samples first to test and verify that there is no error before purchasing in bulk.
Friendly reminder: this product is compatible with a lot of problems,
incorrect assembly or improper operation will burn your equipment.
Limited to professional engineers specified purchase.
Note: Support PCIe4.0, but as long as the extension cable is connected to the signal
will be attenuated, this commodity does not guarantee PCIE4.0 full speed,
equipment aging, poor signal or bad environment, please reduce the speed of the use.
Cable length description.
Cable length refers to the visible part of the cable, excluding the PCB and connectors.
Accessory Note: Comes with a SATA power adapter cable that must be connected for 12V power.
Purchase Notes.
1. When plugging the line must be clear direction, do not insert the reverse or
insert the offset, to prevent burning equipment, plug the line first hold the
equipment socket and then plug the line, to avoid excessive force will be socket
pins plugged off. Use heat-shrinkable tubing to protect the two ends of the wire
at the welding point, and prohibit pulling and bending.
2. a variety of motherboards and equipment signal drive capacity and other
conditions are not the same, we do not guarantee that the results of the test
with you is the same, as long as it is connected to the extension cord,
the signal will be lost.
3. Our products are 100% power test shipment, the gold finger will be tested
with traces of insertion and removal.
4. no DIY ability, can not install their own, please do not buy, the product is dangerous,
non-professionals, please do not buy.
5. This kind of product belongs to the products that work 24 hours a day,
and it is a consumable product. We do not accept returns for non-quality problems.
6. Inserted into the 1x slot with anti-dull impossible to insert the reverse,
but inserted into the 16X slot must be careful not to reverse the insertion,
inserted in reverse will burn the gold finger, because the PCI-E slot has a power supply,
inserted in reverse will result in the burning of the extension cable.
There is a burn gold finger must be inserted backwards,
belong to their own reasons, no return and no refund.
7. If you are sure that the motherboard power supply enough, the extension cable
can not need an external power supply, do not strengthen the power supply port
of the motherboard power supply is not enough, the extension cable must be
connected to an external power supply.
8. graphics card or motherboard is an electronic device will increase with time
and aging oxidation, and then connected to the extension cable will only be
more unstable. Older devices are not supported.
If your device is more than 3 years old, it is not supported.
Email：yxy@xt-xinte.com
Wechat:15012645226
No related record found