|
Copy and share this link on social network or send it to your friends
Copy| Product Name | FEICHAO Seastar138mm 3inch 2-4S DIY FPV Racing Drone PNP/BNF with 1200TVL Camera FSD-252VTX LiteRadio 8CH TX RC Quadcopter |
| Item NO. | F41241-K/L/M/N/O/P/Q/R/S/T |
| Weight | 0.312 kg = 0.6878 lb = 11.0055 oz |
| Category | RC Toy Drone > Hot sale brand |
| Brand | FEICHAO |
| Creation Time | 2020-10-14 |
FEICHAO Seastar138mm 3inch 2-4S DIY FPV Racing Drone PNP/BNF with 1200TVL Camera FSD-252VTX LiteRadio 8CH TX RC Quadcopter
Packing list:
1 x super small buzzer
1 x FSD-252VTX
1 x 1200TVL 2.1mm PAL camera
2 x XT30 plug
1 x 20A 4 in 1 ESC BLHELI_S
1 x 3D printed TPU material camera mount
1 x 12*150mm strap
4 x 3016 three-blade PC propeller
4 x MT1204-5000kv motor
1 x F405 DM Mini flight controller
1 x Seastar 138 138mm rack
(Some kits include the following products:)
1 x FS-RX2A Pro or FD800 receiver（optional）
1 x 650mAh 3S 80C high-voltage 11.4V lithium battery XT30 plug (optional)
1 x FLYSKY FS I6 6-channel 2.4G or LiteRadio 8CH remote control (optional)
1 x 5.8G FPV LST-0093-inch 40CH dual antenna video transmission video glasses (optional)
Precautions:
1. Do not charge the battery when you are away from home, do not charge the battery immediately after flying, do not over-discharge the battery (over-discharge may cause the battery to fail to charge and become useless). .
2. Do not modify any parameters and wiring without knowing the flight control and remote control.
3. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then close the remote control to prevent accidents.
4. This aircraft is recommended to fly indoors. It can fly outdoors in open places when there is no wind, and avoid flying in crowds and places with interferences around.
5. The product is assembled/welded in loose parts. If you have any technical and assembly questions, please feel free to contact us. We have a dedicated technical team to answer related questions.
6. This product is not a toy and is not suitable for children under 14 years of age.
7. Please read the instructions carefully before any use. If you are a beginner, it is recommended to be assisted by an experienced adult.
8. Don't fly too high because the plane is relatively small, please fly within your sight.
9. Novices should pay attention not to take the airplane by hand or let children take it when the airplane is turning, to prevent being scratched.
10. Please turn off the start switch in time when the aircraft falls from a wall or hits other objects during flight. Otherwise, it may cause damage to the flight control motor. Check whether the aircraft is damaged or the screws are loose.
Functions and features:
138mm wheelbase carbon fiber frame
Life time is about 7 minutes
Betaflight version F4 flight control
type-c data line interface
Support voltage 2-4S
Paddle:
Type: 3016 2023
Pitch: 1.6 inches
Material: PC
Weight/g: 1.18g
Inner diameter of center hole: three holes / 1.5mm
Maximum support width: 8.84 mm
ESC:
Product name: 20A Blheli_S 4 in 1 ESC
Maximum current: 20A / 30A
BEC: No
Lipid: 2-4S
Weight: 4.8 grams
Size: 27x31mm (PCB)
Mounting hole: 20x20mm
Motor:
Specification: 1204
KV option: KV5000
Configuration: 9N12P
Stator diameter: 12mm
Stator length: 4mm
Inner shaft diameter: Φ2mm
Outer shaft diameter: Φ1.5mm
Motor size (diameter * lens): Φ15mm* 16.2mm
Weight (g): 5.9g
Support voltage: 2-4S
Flight control:
Project Name: F722 Mini 3~6S Flight Controller
Size: 31 * 30 * 8mm
Packing size: Φ62 * 33mm
Installation hole distance: 20 * 20MM, φ4mm
Weight: 6g
Package weight: 20g
Processor: stm32f722ret6
Gyroscope: mpu6000
B EC: 5V / 3A; 9V / 2.5A
RAM: 16MB
Input voltage: 3-6s
Firmware: betaflight_ 4.1.0_ MATEK722
Image transmission:
1.40 channel
2. Support touch switch and PWM/touch switch selection
3. Support 25mW/200mW selection, five LED high power display
4. LED display channel and status information
5. With OSD input and output interface
6. Directional rod antenna
7. Working voltage (power input): 5V working current: 25mw-300ma, 200mw-500ma
8. Small and lightweight design: outer size 27 * 27mm, weight 4g
camera:
Model: FPV camera
Image sensor: 1/3" COMS
Horizontal resolution: 1200TVL
Lens: 2.1 mm
Signal system: PAL / NTSC
Automatic gain control (AGC): yes
Backlight compensation (BLC): Yes
Minimum illumination: 0.01Lux / 1.2F
Voltage: DC 5 to 40V
Net weight: 5.0g
Dimensions: 19mm*19mm*19mm
Q&A:
Please refer to our pictures to choose the desired combination, all parts are sold separately in our shop, and you can add them as spares. If you have any questions, please feel free to contact us.
SKYPE: +8613640955802
Email：yxy@xt-xinte.com
No related record found