FEICHAO DIY 2.4G tank robot battle remote control 8 channel remote motor controller Suitable for Beginners
【connection method】:
1. Keep the switches of the receiving board and the remote control in the off state,
2. Turn on the switch of the receiving board, turn on the switch of the remote control, and then move the remote control close to the receiving board. The red indicator light on the remote control flashes and then goes off, indicating that the linking is successful. If the flashing does not go off, please wait for a while or shut down all Try again.
【Supply voltage】:
Receiving board voltage: it is recommended to be between 4.5-6V, the highest is not more than 6V
Remote control voltage: 3V (two AA batteries)
[Remote control distance]: within 50 meters
[Remote control frequency]: 2.4G
[Controller size]: 3.5*5.5cm
[Receiver wire length]: about 10 cm
[Package]: 1*Battle remote control
[Function principle]: The receiving board can connect 4 motors, driving motors A and B, driven motors, and skill motors.
(1) The drive motors A and B are installed on the left and right wheels respectively, and the steering effect is realized by one rotation and one non-rotation of the motor, or two rotations together to realize forward and backward; see the picture for the control buttons.
(2) The driven motor does not have a control button, and will follow the drive motor to move forward and backward, so it is called the driven motor; it can be used for some auxiliary functions, such as a rotating operation effect when running, and you can explore various Different operations can achieve different action effects.
(3) The skill motor is controlled by the horizontal button on the right side of the remote control. Generally used for skills, such as launching and attacking.
[Wiring mode]: See the figure below.
No related record found