Home>DIY RC Drone Accessories>Darwin ELRS2.0 F411 15A Bluejay AIO DarwinFPV-ELRS AIO- F415 Flight control FPV 4-in-4 ESC + ELRS2.0 high-frequency head for RC Drone Accessories

Darwin ELRS2.0 F411 15A Bluejay AIO DarwinFPV-ELRS AIO- F415 Flight control FPV 4-in-4 ESC + ELRS2.0 high-frequency head for RC Drone Accessories Item NO.: F47375 F47376

Sold (18)

US$ 48.99

Color: ELRS2.0 F411 15A Bluejay AIO ELRS2.0 F411 15A Bluejay AIO+Vantac ELRS 2.4G Lite TX Module

Quantity: Stock ( 19999980 )

Estimate Shipping Cost

Product Name	Darwin ELRS2.0 F411 15A Bluejay AIO DarwinFPV-ELRS AIO- F415 Flight control FPV 4-in-4 ESC + ELRS2.0 high-frequency head for RC Drone Accessories
Item NO.	F47375 F47376
Weight	0.05 kg = 0.1102 lb = 1.7637 oz
Category	DIY RC Drone Accessories
Creation Time	2022-05-19

Darwin ELRS2.0 F411 15A Bluejay AIO DarwinFPV-ELRS AIO- F415 Flight control FPV 4-in-4 ESC + ELRS2.0 high-frequency head for RC Drone Accessories

FC MCU: STM32F411CEU6(100MHz)
IMU: ICM-20689(SPI)
OSD: Betaﬂight OSD AT7456E
RF: SX1280(2.4GHz)
BEC output: 5V/2A & 3.3V/0.2A
Firmware target:betaflight_4.3.0_BETAFPVF4SX1280
2x Uarts(1,2)
1x SBUS(RX1 inverter)
1x Softserial_TX option
1x External USB solder pad
1x CRT(Current)
1x BUZZ
1x RGB

ESC MCU: EFM8BB21F16G
Input Voltage: 1-3S LiPo
Continuous current: 15A
MAX current (5seconds): 17A
ESC Traget: Bluejay_S_H_50_48_v0.14
Size: 37x36x10.8mm
Installing Hole:25.5x25.5mm(M2)
Weight:5.0g

This is the updated version for Darwin AIO. We integrated the ELRS receiver on the FC to make it easier to apply to the mini Drone. ESC adopts Bluejay firmware and is compatible with 1-3S Lipo input, and the maximum current reaches 17A.FC provides 2 sets of Uarts interfaces and at the same time provides various external devices interfaces such as SBUS, Softserial, CTR, BUZZ, RGB and so on , which perfectly solves the problem of insufficient quantity of F411 Uarts.

Darwin Vantac ELRS Lite Tuner
ExpressLRS is an open source radio link for radio control applications, the Darwin Vantac ELRS Lite tuner is based on the ExpressLRS open source project
ExpressLRS is based on the excellent Semtech SX127x/SX1280 LoRa hardware combined with an STM32 processor. Using LoRa modulation along with reduced packet size, it achieves the best range and latency. It achieves this using a highly optimized over-the-air packet structure while providing range and latency advantages. It supports 900 MHz and 2.4 GHz links, each with their own advantages. 900 MHz supports a maximum packet rate of 200 Hz with higher penetration. OpenTX systems currently support an astonishing 500Hz in the 2.4 GHz band.

2.4G transmitter module, ExpressLRS 2.4G aims to achieve comprehensive performance in terms of speed, latency and range. In addition, a convenient feature of this module is the built-in WiFi module, which enables wireless connection to upgrade firmware. Darwin Vantac ELRS Lite tuners are compatible with remotes with lite-style module bays.

tuner parameters
Packet refresh rate: 50 Hz/150 Hz/250Hz/500 Hz
RF output power: 10mW/25mW/50mW/100mW/250mW/500mW
Frequency band: 2.4GHz ISM
Input voltage: 5V~12V
USB port: Type-C tuner parameters
Packet refresh rate: 50 Hz/150 Hz/250Hz/500 Hz
RF output power: 10mW/25mW/50mW/100mW/250mW/500mW
Frequency band: 2.4GHz ISM
Input voltage: 5V~12V
USB port: Type-C

The Darwin ELRS 2.4G Lite tuner uses a lite-style tuner bracket; compatible with the following remotes: Jumper T-lite, Betafpv LiteRadio 3, TBS Tango 2, Frsky Taranis X9 Lite, Frsky Taranis X-Lite