DIATONE MAMBA F405 MK3 Flight Controller 40A/50A MPU6000 F4 Flight Controller BLHELIS 4in1 ESC 3-6SStack for FPV Racing Drones
Note: Please pay attention to the version of the product you purchase
MAMBA STACK BASIC F405 MK3 40A 6S 8BIT
-
When you connect the USB, the receiver and OSD settings can be saved
-
The pad area of Mini flight controller (20×20) increased by 140%
-
LED signal selection (when Mamba Led sys avaiable)
-
BEC short circuit protection
-
TVS instant high voltage protection 30V
-
F405 models support F.prot(Most)
-
Upgrade the anti-interference cable
Added
-
Add self-recovery insurance to the receiver's 5V power supply
-
Increase the camera VCC power supply pad
-
Standard flight controller (30.5×30.5) adds spare pad
-
Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
FC Specifications
MAMBA Basic F405MK3
MCU: 168MHz STM32F405RGT6
GYRO: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED/MB LED(4 Set 2812 LED)
S/F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 3A (System Power)&
5V 3A(LED)& 9V 3A
MOUNTING: 30.5mm, M3
ESC Specifications(optional)
MAMBA F40 MK2
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:40A×4
BURST CURRENT:50A (10S)
BEC: No
Target:BLHeli_S CH40
SOFT: Dshot300/600
TVS Protection: Yes
MOUNTING: 30.5mm/M3
MAMBA F50
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:50A×4
BURST CURRENT:55A (10S)
BEC: No
Target:BLHeli_S CH40
SOFT: Dshot300/600
TVS Protection: Yes
MOUNTING: 30.5mm/M3
No related record found