BGNING PU Leather Dedicated Base Half Case EOS-RP Protective Leather Case Base for Canon EOS-RP Camera Item NO.: F35455 / F35456

BGNING PU Leather Dedicated Base Half Case EOS-RP Protective Leather Case Base for Canon EOS-RP Camera

Suitable for Canon eos rp camera half set base, other models are not suitable, take care!

  Material: pu

  Contains: Dedicated base + matching hand rope

  Tips for mounting the base: Use 1 yuan or 5 cents coin to align the screw holes at the bottom of the camera and tighten the screws. There are non-fitting parts (basically at the handle closing part). You need to remove the screws and repeatedly move the handle holding part (sandwich). (Aluminum sheet), until the camera fits, then install the screws.

  Tips for the installation of the hand rope: Since the hand rope is a new design, it is slightly wider when used on the rp. It may take a bit of time to wear it. Be patient and wear it. You can wear it with a thin wire or a thread on the hand rope. It is easier to pull in the hole, and it is being improved. The two round hole buttons on the hand rope need to be enlarged with a pen before they can be fastened.