BETAFPV VR01 FPV Goggles w/ 4.3 inch 800*480px HD LCD 5.8G Antennas 3.7V/2000mAh Battery for Racing FPV Model DIY Drone Item NO.: F38916 F38916-A

BETAFPV VR01 FPV Goggles with 4.3 inch 800*480px HD High Brightness LCD 5.8G Antennas 3.7V/2000mAh Battery Support TFCard(C10)Max32G for FPV racing or Model Airplane.

BETAFPV VR01 FPV Goggles - a First-Person-View Goggle with 4.3 inch 800*480px HD high brightness LCD which will allow you to experience a bright world without warped and blurred images. Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, comfortable like as cotton and suitable for all age ranges.

Bullet Point

BETAFPV VR01 FPV Goggles is with 4.3 inch 800*480px HD high brightness LCD, which is specially tuned for FPV racing or Model airplane. 

Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head 

perfectly.

Buit-in super sensitiveness 5.8GHz 40ch receiver,especially with RaceBand.

Come with advanced auto-searching function and show yout the working frequency on screen.

92% transparent lens adopted ,no distort,no blur on the adage of screen.

Light weight 375g with 2hr 2000mAh battery, RTF for any scale, racing, Model airplane game.

Specification

BODY

Dimension: 155x144x113mm

Weight: 375g with 2hr 2000mAh battery

Belt: three-Ways adjustable belt

SCREEN

screen size: 4.3 inch

Screen resolution: 800*480 (No blur after enlarge by the lens)

Screen brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV

View Angle: 12 O’CLOCK

LENS

2.8x boost of the video to acquire intense feel-in-there video

92% transparent rate no distort of light

JACK

Input CVBS

Headphone sound output

TFCard(C10)Max32G

USB DC5V IN,the device operating current of 550mA@5V,built-in battery maximum charge current of 750mA@5V; if the device is working when charging, please pay attention to selecting the rated current greater than 2A/5V charging equipment

BATTERY

Built-in 3.7V/2000mAh high-capacity polymer battery, when the battery is charging, the device the red LED will light when charging is 

completed, here are bright green LED

Each full charge revive is around 2 hours working time

Band and Channel Selection

Operation Instructions

KEY

K1>SearCH/AV

Default mode, Short press for automatically search signals to a certain signal strength and stops on that channel; Long press switch RF MOD and Long press for AV MOD; In Play mode, pressed jump volume adjust OSD.

K2>MENU/Power

Default mode, Short press for MENU OSD; Long press 3S for Power OFF/ON; MENU pressed, this button is use as the Return.

K3>REC/Play/OK

Default mode, Short press for recording /STOP; Long press for Play mode; MENU pressed, this button is use as the confirmed.

Band+/VOL+

Default mode, Short press for Band+ option A,B,D,E,F,R cycle selection; Long press for Volume control -; MENU pressed, this button is use as the UP.

K5>CH+/VOL-

Default mode, Short press for CH 1~8 cycles; Long press for Volume control +, MENU pressed, this button is use as the DOWN.

PLAYBACK

Call MENU and select Playback (Short Press K1 button to call menu, and use K3 button to select Playback mode; Or long pressed K3 )

Review/Replay in Playback mode (Playing Short K1 jump volume adjust OSD)

Buttons have different function in playback mode

Record file: AVI, 800*480px progressive

Support up to 32G TF card (C10 recommend)

K2: Playback menu (volume control/file delete/protect)

K4: UP/ fast backward<<

K5: DOWM/ fast backward>>

K3: Select/Play/ Pause

K1: Quit Playback mode

NOTE: If the device is not used for a long time, please charged once every four months, inorder to protect the battery.

Package contains:

1 * BETAFPV VR01 FPV Goggles

1 * USB Charging Cable

2 * Dipole 5.8G Antennas  

1 * Adjustable Headband

1 * 14DBI Mushroom Antenna(Optional)

1 * 14DBI Flat Panel Antenna(Optional)