Home>Consumer Electronics>Computer Adapter>Aluminum HDD Enclosure SSD to USB3.0 For 2012 MACBOOKAIR A1465 A1466 MD223 MD231
Aluminum HDD Enclosure SSD to USB3.0 For 2012 MACBOOKAIR A1465 A1466 MD223 MD231

Aluminum HDD Enclosure SSD to USB3.0 For 2012 MACBOOKAIR A1465 A1466 MD223 MD231 Item NO.: F24225

Write a Review
US$ 12.34
Quantity

Copy and share this link on social network or send it to your friends

Copy
Product Name Aluminum HDD Enclosure SSD to USB3.0 For 2012 MACBOOKAIR A1465 A1466 MD223 MD231
Item NO. F24225
Weight 0.1023 kg = 0.2255 lb = 3.6085 oz
Category Consumer Electronics > Computer Adapter
Tag
Brand XT-XINTE
Creation Time 2018-03-14

Aluminum HDD Enclosure SSD to USB3.0 For 2012 MACBOOKAIR A1465 A1466 MD223 MD231


1. Before using this product, you must ensure that your hard disk is not encrypted, otherwise it will not be recognized by using the hard disk box connected to the computer!
     
2. If your hard disk's previous operating system was MAC OS, use the HDD box to connect to the WINDOWS system's computer. If you open "My Computer", you cannot see the disk partition. Please enter the Disk Manager to repartition the format. Can be used normally!
     
3, use the mobile hard disk box, please do not connect the front USB port of the desktop, do not connect the USB port near the keyboard or mouse interface on the motherboard, because it is used for USB flash drives, keyboards, mice and other low-power devices, can not Meet your mobile hard drive's power requirements.
     
4. If the nominal current of your hard disk is greater than or equal to 1.7A (can be found on the label of the hard disk), we recommend that you use a HUB with external power supply to use the mobile hard disk because the maximum power supply capacity of the USB 3.0 interface is 1A. Hard disk current demand, power consumption, USB interface can not meet the power requirements, it will cause the mobile hard disk can not identify, or can not read or write data, or move the hard disk with the computer to disconnect the connection and other faults.
      
5. If the mobile hard disk connected to USB 3.0 is not recognized or can be recognized but it is not working properly, you can try to connect to the USB 2.0 interface to reduce the speed and reduce the power consumption. However, this is not a panacea, and some of the power consumption can be used. The reduced power consumption cannot be used either.
     
6. Do not move the hard disk drive box during use, otherwise it will cause data damage or your hard disk's own firmware will be lost. The hard disk will be completely scrapped! When the mobile hard disk is not in use, please remove the data cable from the mobile hard disk box, otherwise it will easily cause damage to the USB interface.








No related record found