ADT-Link PCIe 3.0 x4 Male to x4 Female Extension Cable 32G/bps PCI-E 4x Graphics SSD RAID Extender w/Vertical Bracket Stand Holder Base Item NO.: F29456-B F29454-B F29455-B

ADT-Link PCIe 3.0 x4 Male to x4 Female Extension Cable 32G/bps PCI-E 4x Graphics SSD RAID Extender w/Vertical Bracket Stand Holder Base

Model: Vertical 90 Degree R22SL 

New design

1.Wire advantages, the use of the German patent imported wire, using Taiwan's imports Lotes connectors, high frequency support PCIe 3.0 32G/Bps stable transfer.
2. Cable length from 5 cm to 1 m can accept custom-made, our sales turn wiring, wire low impedance, wire  within 60 cm long support PCIe3.0 at full speed.
3.Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, durability
4.Product use high quality materials, PCB precision workmanship, thickening to 1 oz copper thickness, content of gold finger plating, gold plated conductive performance is good, can reduce oxidize higher impedance caused by the crash blue screen.Full speed stability, need not to slow down, there is no compatibility problems.
5.Product selection of the wire itself is very durable, used in metal welding point 3 mm in thickness PCB pads to protect, and lock the screws and hex nut fastening, solid and reliable products pulling resistance, anti-interference, there will be no nail wire break off.Wire can be bent can fold, does not affect use.
6.PCB design of dwarf and add fat, dwarf is not card to the graphics card, add fat extended design make the board more easy to install, reduce the damage probability. 

ADT-BS

Materials: Acrylic

Net Weight: 0.3Kg

Dimension: 22cm x 14cm x 6.5cm

Support: PCIe area of your Case

Graphics card capacity: One graphics card per holder

Application: Vertical Graphics Card Base Kit

Overview:
Designed for PCI-E card external, this base-board allows you to vertically display a graphics card or any PCI-E cards.
Installation couldn't be easier, install your graphics card on the holder, connect it to your motherboard with the included extension cable, and you're ready to go.

System requirement:
• Riser cable, ADT part-number as below:

R11SL；R11SR；R11SL-TL

R22SL；R22SR；R23SL；R23SR

R33SL；R33SR；R33SQ

R41SL；R41SR；R42SL；R42SR；R43SL；R43SR

R51SL；R51SR；R52SL；R52SR；R53SL；R53SR

R61SL；R61SR；R62SL；R62SR；R63SL；R63SR